Skip to content

King George County Fire and EMS Frequencies

King George County in Virginia has 0 countywide conventional frequencies and 6 countywide talkgroups in our database. Use the list of 6 cities and communities below for local fire departments and EMS agencies.

About King George County Fire and EMS Frequencies

Quick answer: Trunked: King George County, for example King George County Fire talkgroup 100 (hex 64).

  • Trunked radio systems that carry fire and EMS traffic here: King George County: 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For King George County, start with the Simulcast site of King George County. Its control channels: 769.60625, 770.80625, 771.20625 MHz.

Data updated .

King George County trunked talkgroups

King George County

King George County talkgroups
AgencyDescriptionTalkgroupHexMode
King George County FireMain10064T
King George County FireIncident10165T
King George County FireKing George County Fire – Tactical Channel10266T
King George County FireIncident11371T
King George County FireTraining13789T
King George County FireTraining Incident1388aT

Radio system sites in King George County

Program the control channel first; your scanner finds the voice channels from it.

Simulcast · King George County
RFSS 1 · Site 1 (hex 1) · NAC C41
Control 769.60625, 770.80625, 771.20625, 771.50625
Voice 771.95625
Edgehill · Virginia Statewide Agencies Radio System (STARS)
RFSS 1 · Site 27 (hex 1B) · NAC 198
Control 152.5175, 152.8175
Voice 158.7525
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in King George County

Common questions

Do fire departments and EMS use a trunked radio system in King George County?

Yes. Fire and EMS talkgroups are listed for King George County: 6 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in King George County?

A trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in King George County?

For King George County, start with the Simulcast site of King George County. Its control channels are 769.60625, 770.80625, 771.20625, 771.50625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are King George County fire and EMS talkgroups encrypted?

None of the 6 talkgroups listed for King George County are marked encrypted.