About Highland County Fire and EMS Frequencies
Quick answer: Fire dispatch for Highland County: Highland, County of 451.4500 MHz, narrow FM, 205 DPL.
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Highland County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Highland, County of | Fire/Rescue Dispatch (Sounding Knob) | 451.4500 In 456.4500 | 205 DPL | FMN | WNAA598 |
| Highland, County of | Fire/Rescue Dispatch (Doe Hill) | 451.4500 In 456.4500 | 146.2 PL | FMN | WNAA598 |
| Highland, County of | Fire/Rescue Dispatch (Lantz Mountain) | 453.3375 In 458.3375 | 205 DPL | FMN | WNAA598 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Highland, County of | Bolar Volunteer Fire Department | 460.3875 In 465.3875 | 67.0 PL | FMN | WQVP723 |
Radio system sites in Highland County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Highland County
Common questions
What frequency does the fire department use in Highland County?
Fire dispatch channels listed for Highland County: Highland, County of 451.4500 MHz, narrow FM, 205 DPL.
What scanner do I need to listen to fire and EMS in Highland County?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Highland County?
For Highland County, start with the Sounding Knob site of Virginia Statewide Agencies Radio System (STARS). Its control channels are 152.5325, 152.5775 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Highland County fire and EMS frequencies encrypted?
None of the 4 conventional frequencies listed for Highland County are marked encrypted.