Skip to content

Franklin County Fire and EMS Frequencies

Franklin County in Virginia has 4 countywide conventional frequencies and 14 countywide talkgroups in our database. Use the list of 9 cities and communities below for local fire departments and EMS agencies.

About Franklin County Fire and EMS Frequencies

Quick answer: Fire dispatch for Franklin County: Franklin, City of Fire 156.0450 MHz, FM, 445 DPL; Franklin, County of 154.2275 MHz, narrow FM, 162.2 PL. Trunked: Roanoke Valley Radio System (RVRS), for example Roanoke City Fire-EMS talkgroup 201 (hex c9).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Roanoke Valley Radio System (RVRS): 14 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Franklin County, start with the Franklin Simulcast site of Roanoke Valley Radio System (RVRS). Its control channels: 857.1875, 858.5125, 859.1875 MHz.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Data updated .

Franklin County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Franklin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Franklin, City of FireFire Tone-out156.0450445 DPLFMWPXT261
Franklin, County ofFire/Rescue Dispatch154.2275162.2 PLFMNKIA681

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Franklin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Franklin, City of FireFranklin, City of Fire – Tactical Channel154.2500156.7 PLFM—

Hospitals & Medical

Hospitals & Medical frequencies for Franklin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Franklin, City ofHEAR (ambulance communication with hospitals)155.4000FMWPAY802

Franklin County trunked talkgroups

Roanoke Valley Radio System (RVRS)

Roanoke Valley Radio System (RVRS) talkgroups
AgencyDescriptionTalkgroupHexMode
Roanoke City Fire-EMSMain (Channel 1)201c9D
Roanoke City Fire-EMSTactical Response202caD
Roanoke City Fire-EMSRoanoke City Fire-EMS – Tactical Channel203cbD
Roanoke City Fire-EMSRoanoke City Fire-EMS – Tactical Channel204ccD
Roanoke City Fire-EMSRoanoke City Fire-EMS – Tactical Channel205cdD
Roanoke City Fire-EMSRoanoke City Fire-EMS – Tactical Channel206ceD
Roanoke City Fire-EMSSenior Staff208d0D
Roanoke City Fire-EMSRoanoke City Fire-EMS – Fire Ground209d1D
Roanoke City Fire-EMSExecutive Staff210d2D
Roanoke City Fire-EMSPrevention211d3D
Roanoke City Fire-EMSTraining212d4D
Roanoke City Fire-EMSAdministration213d5D
Roanoke City Fire-EMSRoanoke City Fire-EMS – Tactical Channel214d6D
1 encrypted talkgroup (cannot be monitored)
Roanoke Valley Radio System (RVRS) encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
Roanoke City Fire-EMSRoanoke City Fire-EMS – Tactical Channel207cfD Encrypted

Radio system sites in Franklin County

Program the control channel first; your scanner finds the voice channels from it.

Franklin Simulcast · Roanoke Valley Radio System (RVRS)
RFSS 1 · Site 2 (hex 2) · NAC 342
Control 857.1875, 858.5125, 859.1875, 859.5125
Voice 856.6125, 858.1875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Franklin County

Common questions

What frequency does the fire department use in Franklin County?

Fire dispatch channels listed for Franklin County: Franklin, City of Fire 156.0450 MHz, FM, 445 DPL; Franklin, County of 154.2275 MHz, narrow FM, 162.2 PL.

Do fire departments and EMS use a trunked radio system in Franklin County?

Yes. Fire and EMS talkgroups are listed for Roanoke Valley Radio System (RVRS): 14 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Franklin County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Franklin County?

For Franklin County, start with the Franklin Simulcast site of Roanoke Valley Radio System (RVRS). Its control channels are 857.1875, 858.5125, 859.1875, 859.5125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Franklin County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for Franklin County are marked encrypted.

Are Franklin County fire and EMS talkgroups encrypted?

1 of the 14 talkgroups listed for Franklin County are marked fully or partly encrypted; a scanner cannot decode encrypted audio.