About Campbell County Fire and EMS Frequencies
Quick answer: Fire dispatch for Campbell County: Campbell County Fire 155.1900 MHz, narrow FM, 156.7 PL. Trunked: Central Virginia Radio Communications System, for example Campbell County Fire/EMS talkgroup 6000 (hex 1770).
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Central Virginia Radio Communications System: 14 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Campbell County, start with the Campbell County Simulcast site of Central Virginia Radio Communications System. Its control channels: 851.35, 851.95, 852.7375 MHz.
Data updated .
Campbell County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Campbell County Fire | Fire/EMS Dispatch (multicast from trunked system) | 155.1900 In 156.0600 | 156.7 PL | FMN | — |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Campbell County Fire | Fire/EMS Operations (multicast from trunked system) | 150.9950 In 159.0750 | 156.7 PL | FMN | — |
| Campbell County Fire | Fire/EMS Operations (multicast from trunked system) | 151.0250 In 154.8900 | 156.7 PL | FMN | WPKE721 |
| Campbell County Fire | County Operations (multicast from trunked system) | 151.0550 In 153.9500 | 156.7 PL | FMN | — |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Campbell County Hospital | EMS-to-Hospital | 462.9500 In 467.9500 | 136.5 PL | FMN | — |
Campbell County trunked talkgroups
Central Virginia Radio Communications System
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Campbell County Fire/EMS | Campbell County Fire/EMS – Dispatch | 6000 | 1770 | D |
| Campbell County Fire/EMS | Operations | 6001 | 1771 | D |
| Campbell County Fire/EMS | Operations | 6002 | 1772 | D |
| Campbell County Fire/EMS | Operations | 6003 | 1773 | D |
| Campbell County Fire/EMS | Campbell County Fire/EMS – Fire Ground (Brookville) | 6012 | 177c | D |
| Campbell County Fire/EMS | Campbell County Fire/EMS – Fire Ground (Gladys) | 6014 | 177e | D |
| Campbell County Fire/EMS | Campbell County Fire/EMS – Fire Ground (Lyn-Dan Heights) | 6015 | 177f | D |
| Campbell County Fire/EMS | Campbell County Fire/EMS – Fire Ground (Evington) | 6017 | 1781 | D |
| Campbell County Fire/EMS | Campbell County Fire/EMS – Fire Ground | 6020 | 1784 | D |
| Campbell County Fire/EMS | Campbell County Fire/EMS – Fire Ground | 6022 | 1786 | D |
| Campbell County Fire/EMS | Campbell County Fire/EMS – Fire Ground | 6023 | 1787 | D |
| Central Virginia Radio Communications System | Regional Fire Mutual Aid | 4001 | fa1 | D |
| Campbell County Fire/EMS | Event | 6006 | 1776 | D |
| Campbell County Fire/EMS | Event | 6007 | 1777 | D |
Radio system sites in Campbell County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Campbell County
Common questions
What frequency does the fire department use in Campbell County?
Fire dispatch channels listed for Campbell County: Campbell County Fire 155.1900 MHz, narrow FM, 156.7 PL.
Do fire departments and EMS use a trunked radio system in Campbell County?
Yes. Fire and EMS talkgroups are listed for Central Virginia Radio Communications System: 14 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Campbell County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Campbell County?
For Campbell County, start with the Campbell County Simulcast site of Central Virginia Radio Communications System. Its control channels are 851.35, 851.95, 852.7375, 853.0625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Campbell County fire and EMS frequencies encrypted?
None of the 5 conventional frequencies listed for Campbell County are marked encrypted.
Are Campbell County fire and EMS talkgroups encrypted?
None of the 14 talkgroups listed for Campbell County are marked encrypted.