Skip to content

Alberta Fire and EMS Frequencies

We do not have frequencies listed specifically for Alberta in Brunswick County, Virginia yet. Countywide channels for Brunswick County that may also cover this area are shown below when we have them. The closest trunked radio site we have is South Hill (Virginia Statewide Agencies Radio System (STARS)), about 14 miles away.

About Alberta Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Alberta: Brunswick County Fire 460.1125 MHz, P25, NAC 2BE.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Brunswick County channels that also cover Alberta

Fire Dispatch

Fire Dispatch frequencies for Brunswick County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Brunswick County FireFire/EMS Dispatch460.1125
In 465.1125
NAC 2BEP25WRAA243

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Brunswick County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Brunswick County FireCentral Lifesaving & Rescue Squad155.2950FMNWNDG938
Brunswick County FireBrunswick County Fire – Operations460.3875
In 465.3875
FMNWRAA243

Nearest trunked radio sites

Distances are measured from the center of Alberta.

South Hill · Virginia Statewide Agencies Radio System (STARS)
RFSS 2 · Site 4 (hex 4) · NAC 196 · about 14 mi away
Control 151.1675, 159.2175
Voice 158.7675, 159.0075, 159.3225
Simulcast · Dinwiddie County (VA)
RFSS 1 · Site 1 (hex 1) · NAC B90 · about 21 mi away
Control 769.09375
Voice 770.50625, 771.55625, 772.44375, 772.91875, 774.15625
Simulcast · Lunenburg County
RFSS 10 · Site 10 (hex A) · NAC A · about 21 mi away
Control 770.06875, 771.93125, 773.39375, 774.71875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Alberta?

We do not have a fire dispatch channel listed specifically for Alberta. The county-level fire dispatch channels in the same county: Brunswick County Fire 460.1125 MHz, P25, NAC 2BE.

What scanner do I need to listen to fire and EMS in Alberta?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Alberta?

For Alberta, start with the South Hill site of Virginia Statewide Agencies Radio System (STARS). Its control channels are 151.1675, 159.2175 MHz. Program a control channel first; the scanner finds the voice channels from it.