Skip to content

Bath County Fire and EMS Frequencies

Bath County in Virginia has 2 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 3 cities and communities below for local fire departments and EMS agencies.

About Bath County Fire and EMS Frequencies

Quick answer: Fire dispatch for Bath County: Bath County Fire 453.0750 MHz, narrow FM, 100.0 PL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Bath County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Bath County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bath County FireWest Dispatch Mountain Grove453.0750100.0 PLFMNWPQB472
Bath County FireNorth Dispatch Duncan's Knob453.2375
In 458.2375
172 DPLFMNWPTU772

Radio system sites in Bath County

Program the control channel first; your scanner finds the voice channels from it.

Duncan Knob · Virginia Statewide Agencies Radio System (STARS)
RFSS 2 · Site 23 (hex 17) · NAC 19B
Control 152.5025, 159.2325
Voice 151.3925, 159.3825
Bath County Hydro · Virginia Statewide Agencies Radio System (STARS)
RFSS 2 · Site 26 (hex 1A) · NAC 19F
Control 161.8125, 161.9
Voice 161.875, 162
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Bath County

Common questions

What frequency does the fire department use in Bath County?

Fire dispatch channels listed for Bath County: Bath County Fire 453.0750 MHz, narrow FM, 100.0 PL.

What scanner do I need to listen to fire and EMS in Bath County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Bath County?

For Bath County, start with the Duncan Knob site of Virginia Statewide Agencies Radio System (STARS). Its control channels are 152.5025, 159.2325 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Bath County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Bath County are marked encrypted.