About Hooper Police Frequencies
Quick answer: Trunked: Utah Communications Authority (P25) (Project 25), for example Weber County Sheriff talkgroup 5165 (hex 142d).
- Trunked radio systems that carry law-enforcement traffic here: Utah Communications Authority (P25) (Project 25): 26 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Hooper, start with the Promontory Point site of Utah Communications Authority (P25), about 9 miles away. Its control channels: 769.75625, 772.88125 MHz.
- 11 listed entries are marked encrypted. No scanner can decode encrypted audio.
Data updated .
Weber County channels that also cover Hooper
Utah Communications Authority (P25)
Project 25 ยท System ID 00A
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Weber County Sheriff | Law Dispatch | 5165 | 142d | T |
| Weber County Sheriff | Weber State University Car to Car | 5107 | 13f3 | T |
| Weber County Sheriff | West Car to Car | 5108 | 13f4 | T |
| Weber County Sheriff | Event | 5130 | 140a | T |
| Weber County Sheriff | Event | 5131 | 140b | T |
| Weber County Sheriff | Event | 5132 | 140c | T |
| Weber County Sheriff | Event | 5133 | 140d | T |
| Weber County Sheriff | Event | 5134 | 140e | T |
| Weber County Sheriff | Event | 5135 | 140f | T |
| Weber County Sheriff | Event | 5136 | 1410 | T |
| Weber County Sheriff | Event | 5137 | 1411 | T |
| Weber County Sheriff | Weber/Morgan Counties Car to Car | 5145 | 1419 | T |
| Weber County Sheriff | Ogden Animal Control | 5150 | 141e | T |
| Weber County Sheriff | Car to Car | 5162 | 142a | T |
| Weber County Sheriff | Animal Control | 5163 | 142b | T |
11 encrypted talkgroups (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Weber County Sheriff | Sheriff Main | 5105 | 13f1 | T Encrypted |
| Weber County Sheriff | Service | 5103 | 13ef | T Encrypted |
| Weber County Sheriff | South Police | 5104 | 13f0 | T Encrypted |
| Weber County Sheriff | North Police | 5106 | 13f2 | T Encrypted |
| Weber County Sheriff | County Jail | 5110 | 13f6 | T Encrypted |
| Weber County Sheriff | Kiesel Jail | 5111 | 13f7 | T Encrypted |
| Weber County Sheriff | Courts | 5112 | 13f8 | T Encrypted |
| Weber County Sheriff | Juvenile Court | 5113 | 13f9 | T Encrypted |
| Weber County Sheriff | Weber Metro Strike Force | 5128 | 1408 | T Encrypted |
| Weber County Sheriff | Event | 5138 | 1412 | T Encrypted |
| Weber County Sheriff | Event | 5139 | 1413 | T Encrypted |
Nearest trunked radio sites
Distances are measured from the center of Hooper.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
Do the police use a trunked radio system in Hooper?
Yes. The county-level systems that cover Hooper are Law-enforcement talkgroups are listed for Utah Communications Authority (P25) (Project 25): 26 talkgroups. A trunking scanner is required.
What scanner do I need to listen to police in Hooper?
A trunking scanner that supports Project 25 is needed for the trunked talkgroups.
What are the control channels for trunked radio in Hooper?
For Hooper, start with the Promontory Point site of Utah Communications Authority (P25). Its control channels are 769.75625, 772.88125 MHz. Program a control channel first; the scanner finds the voice channels from it.