About Weber County Fire and EMS Frequencies
Quick answer: Trunked: Utah Communications Authority (P25) (Project 25), for example Weber County Fire talkgroup 5114 (hex 13fa).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Utah Communications Authority (P25) (Project 25): 13 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Weber County, start with the Weber County Simulcast site of Utah Communications Authority (P25). Its control channels: 769.25625, 773.38125 MHz.
Data updated .
Weber County conventional frequencies
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Weber County Hospital | McKay Dee Hospital | 463.1750 In 468.1750 | 114.8 PL | FMN | KTZ499 |
Weber County trunked talkgroups
Utah Communications Authority (P25)
Project 25 · System ID 00A
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Weber County Fire | Weber County Fire – Dispatch | 5114 | 13fa | T |
| Weber County Fire | Chief | 5148 | 141c | T |
| Weber County Fire | Fire Emergency | 5121 | 1401 | T |
| Weber County Fire | Weber County Fire – Alternate | 5115 | 13fb | T |
| Weber County Fire | Weber County Fire – Alternate | 5116 | 13fc | T |
| Weber County Fire | Weber County Fire – Alternate | 5117 | 13fd | T |
| Weber County Fire | Weber County Fire – Alternate | 5118 | 13fe | T |
| Weber County Fire | Weber County Fire – Alternate | 5119 | 13ff | T |
| Weber County Fire | Weber County Fire – Alternate | 5120 | 1400 | T |
| Weber County Fire | Search and Rescue | 5125 | 1405 | T |
| Weber County Fire | Weber County Fire – Alternate | 5141 | 1415 | T |
| Weber County Fire | Fire Training | 5152 | 1420 | T |
| Weber County Fire | Weber County Fire – Fire Ground | 5164 | 142c | T |
Radio system sites in Weber County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Weber County
Common questions
Do fire departments and EMS use a trunked radio system in Weber County?
Yes. Fire and EMS talkgroups are listed for Utah Communications Authority (P25) (Project 25): 13 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Weber County?
The analog conventional channels can be heard on any scanner; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.
What are the control channels for trunked radio in Weber County?
For Weber County, start with the Weber County Simulcast site of Utah Communications Authority (P25). Its control channels are 769.25625, 773.38125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Weber County fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Weber County are marked encrypted.
Are Weber County fire and EMS talkgroups encrypted?
None of the 13 talkgroups listed for Weber County are marked encrypted.