About Fairview Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Fairview: Sanpete County Fire 152.0075 MHz, narrow FM, CSQ. County-level ems dispatch that covers Fairview: Sanpete County EMS 153.9650 MHz, narrow FM, 114.8 PL. Trunked: Utah Communications Authority (P25) (Project 25), for example Sanpete County Fire talkgroup 8610 (hex 21a2).
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Utah Communications Authority (P25) (Project 25): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Fairview, start with the Boarding House Ridge site of Carbon and Emery County Digital System, about 14 miles away. Its control channels: 154.0175, 155.0175 MHz.
Data updated .
Sanpete County channels that also cover Fairview
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sanpete County Fire | Fire/EMS Paging | 152.0075 | CSQ | FMN | WQKP256 |
| Sanpete County Fire | Sanpete County Fire – Dispatch | 154.3250 | FMN | KNCB872 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sanpete County EMS | Sanpete County EMS – Dispatch (linked) | 153.9650 In 154.7250 | 114.8 PL | FMN | KEC554 |
| Sanpete County EMS | Sanpete County EMS – Dispatch (linked) | 155.8350 In 158.9250 | 107.2 PL | FMN | WPTV808 |
| Sanpete County EMS | Sanpete County EMS – Dispatch (linked) | 155.9250 In 154.1150 | 131.8 PL | FMN | WQI384 |
Utah Communications Authority (P25)
Project 25 · System ID 00A
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Sanpete County Fire | Sanpete County Fire – Dispatch | 8610 | 21a2 | T |
| Sanpete County Fire | Sanpete County Fire – Alternate | 8611 | 21a3 | T |
Nearest trunked radio sites
Distances are measured from the center of Fairview.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Fairview?
We do not have a fire dispatch channel listed specifically for Fairview. The county-level fire dispatch channels in the same county: Sanpete County Fire 152.0075 MHz, narrow FM, CSQ.
What frequency does EMS or the ambulance service use in Fairview?
We do not have a EMS dispatch channel listed specifically for Fairview. The county-level EMS dispatch channels in the same county: Sanpete County EMS 153.9650 MHz, narrow FM, 114.8 PL.
Do fire departments and EMS use a trunked radio system in Fairview?
Yes. The county-level systems that cover Fairview are Fire and EMS talkgroups are listed for Utah Communications Authority (P25) (Project 25): 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Fairview?
The analog conventional channels can be heard on any scanner; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.
What are the control channels for trunked radio in Fairview?
For Fairview, start with the Boarding House Ridge site of Carbon and Emery County Digital System. Its control channels are 154.0175, 155.0175 MHz. Program a control channel first; the scanner finds the voice channels from it.