Skip to content

Millard County Fire and EMS Frequencies

Millard County in Utah has 12 countywide conventional frequencies and 5 countywide talkgroups in our database. Use the list of 13 cities and communities below for local fire departments and EMS agencies.

About Millard County Fire and EMS Frequencies

Quick answer: Fire dispatch for Millard County: Millard County Fire 152.0075 MHz, narrow FM, 71.9 PL. Trunked: Utah Communications Authority (P25) (Project 25), for example Millard County Fire talkgroup 9009 (hex 2331).

  • 12 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Utah Communications Authority (P25) (Project 25): 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Millard County, start with the Scipio Pass site of Utah Communications Authority (P25). Its control channels: 769.08125, 773.93125 MHz.

Data updated .

Millard County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Millard County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Millard County FireFire/EMS Paging152.007571.9 PLFMNWQMY772
Millard County FireEast (Cricket Mtn)154.3400
In 158.9250
94.8 PLFMNWQHW351
Millard County FireWest (Notch Peak)154.3850
In 153.7700
94.8 PLFMNWQHW351
Millard County FireSearch & Rescue Repeater154.7550
In 156.0300
173.8 PLFMNWQCI999

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Millard County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Millard County FireSearch & Rescue Posse153.395077.0 PLFMNWPMK770
Millard County FireFire Direct153.830094.8 PLFMNWQHW351
Millard County FireFilmore Fire Tactical154.2050CSQFMNWPUE426
Millard County FireDelta Fire Tactical154.4150CSQFMNWNPB239
Millard County FireSearch & Rescue Tactical155.1600CSQFMNWPLP688

Fire Talk-around

Fire Talk-around frequencies for Millard County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Millard County FireHinckley Fire153.8900CSQFMN—
Millard County FireOak City Fire154.3700CSQFMNWPXH485
Millard County FireLynndyl Fire158.805071.9 PLFMNWQBE513

Millard County trunked talkgroups

Utah Communications Authority (P25)

Project 25 · System ID 00A

Utah Communications Authority (P25) talkgroups
AgencyDescriptionTalkgroupHexMode
Millard County FireMillard County Fire – Dispatch90092331T
Millard County FireMillard County Fire – Dispatch (Fire & EMS Paging)90312347T
Millard County FireMillard County Fire – Alternate90102332T
Millard County EMSMillard County EMS – Dispatch90112333T
Millard County EMSMillard County EMS – Alternate90122334T

Radio system sites in Millard County

Program the control channel first; your scanner finds the voice channels from it.

Scipio Pass · Utah Communications Authority (P25)
Project 25 · RFSS 95 · Site 95 (hex 5F) · NAC FFF
Control 769.08125, 773.93125
Voice 769.31875, 771.24375, 771.56875, 772.10625, 772.86875, 773.05625
White Pine Peak · Utah Communications Authority (P25)
Project 25 · RFSS 115 · Site 115 (hex 73) · NAC 203
Control 769.29375, 774.84375
Voice 769.40625, 769.44375, 769.90625, 770.26875, 770.44375, 772.34375, 774.19375
Delta Peak · Utah Communications Authority (P25)
Project 25 · RFSS 131 · Site 131 (hex 83) · NAC 213
Control 770.34375, 774.70625
Voice 771.28125, 771.96875, 773.18125
Scipio · Utah Communications Authority (P25)
Project 25 · RFSS 133 · Site 133 (hex 85) · NAC 215
Control 769.26875, 771.60625
Voice 769.76875, 770.51875, 771.01875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Millard County

Common questions

What frequency does the fire department use in Millard County?

Fire dispatch channels listed for Millard County: Millard County Fire 152.0075 MHz, narrow FM, 71.9 PL.

Do fire departments and EMS use a trunked radio system in Millard County?

Yes. Fire and EMS talkgroups are listed for Utah Communications Authority (P25) (Project 25): 5 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Millard County?

The analog conventional channels can be heard on any scanner; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.

What are the control channels for trunked radio in Millard County?

For Millard County, start with the Scipio Pass site of Utah Communications Authority (P25). Its control channels are 769.08125, 773.93125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Millard County fire and EMS frequencies encrypted?

None of the 12 conventional frequencies listed for Millard County are marked encrypted.

Are Millard County fire and EMS talkgroups encrypted?

None of the 5 talkgroups listed for Millard County are marked encrypted.