Skip to content

Juab County Fire and EMS Frequencies

Juab County in Utah has 0 countywide conventional frequencies and 6 countywide talkgroups in our database. Use the list of 5 cities and communities below for local fire departments and EMS agencies.

About Juab County Fire and EMS Frequencies

Quick answer: Trunked: Utah Communications Authority (P25) (Project 25), for example Juab County Fire talkgroup 5932 (hex 172c).

  • Trunked radio systems that carry fire and EMS traffic here: Utah Communications Authority (P25) (Project 25): 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Juab County, start with the Godiva Peak site of Utah Communications Authority (P25). Its control channels: 769.18125, 774.30625 MHz.

Data updated .

Juab County trunked talkgroups

Utah Communications Authority (P25)

Project 25 ยท System ID 00A

Utah Communications Authority (P25) talkgroups
AgencyDescriptionTalkgroupHexMode
Juab County FireSearch and Rescue5932172cT
Juab County FireCounty Fire59451739T
Juab County FireCounty Fire5946173aT
Juab County FireCounty Fire5947173bT
Juab County EMSCar to Car59881764T
Juab County EMSCar to Car59891765T

Radio system sites in Juab County

Program the control channel first; your scanner finds the voice channels from it.

Godiva Peak · Utah Communications Authority (P25)
Project 25 · RFSS 23 · Site 23 (hex 17) · NAC BCF
Control 769.18125, 774.30625
Voice 769.33125, 769.70625, 771.41875, 772.13125, 772.93125, 773.54375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Juab County

Common questions

Do fire departments and EMS use a trunked radio system in Juab County?

Yes. Fire and EMS talkgroups are listed for Utah Communications Authority (P25) (Project 25): 6 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Juab County?

A trunking scanner that supports Project 25 is needed for the trunked talkgroups.

What are the control channels for trunked radio in Juab County?

For Juab County, start with the Godiva Peak site of Utah Communications Authority (P25). Its control channels are 769.18125, 774.30625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Juab County fire and EMS talkgroups encrypted?

None of the 6 talkgroups listed for Juab County are marked encrypted.