Skip to content

Duchesne County Fire and EMS Frequencies

Duchesne County in Utah has 4 countywide conventional frequencies and 6 countywide talkgroups in our database. Use the list of 7 cities and communities below for local fire departments and EMS agencies.

About Duchesne County Fire and EMS Frequencies

Quick answer: Fire dispatch for Duchesne County: Duchesne County Fire 155.0550 MHz, narrow FM, 114.8 PL; Ute Indian Tribe Fire 154.8900 MHz, narrow FM, 103.5 PL. EMS dispatch for Duchesne County: Duchesne County EMS 152.0075 MHz, narrow FM, no tone. Trunked: Utah Communications Authority (P25) (Project 25), for example Duchesne County Fire talkgroup 4940 (hex 134c).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Utah Communications Authority (P25) (Project 25): 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Duchesne County, start with the Steamboat Mountain site of Utah Communications Authority (P25). Its control channels: 770.18125, 773.13125 MHz.

Data updated .

Duchesne County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Duchesne County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Duchesne County FireFire/EMS East (Little Mtn)155.0550
In 151.2350
114.8 PLFMNWPDS897
Duchesne County FireFire/EMS West (Tabby Mtn)155.8350
In 151.2800
167.9 PLFMNWPDS897
Ute Indian Tribe FireUte Indian Tribe Fire – Dispatch154.8900
In 159.0600
103.5 PLFMNKNIL283

EMS Dispatch

EMS Dispatch frequencies for Duchesne County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Duchesne County EMSCountywide EMS Paging152.0075FMNWQJV705

Duchesne County trunked talkgroups

Utah Communications Authority (P25)

Project 25 · System ID 00A

Utah Communications Authority (P25) talkgroups
AgencyDescriptionTalkgroupHexMode
Duchesne County FireDuchesne County Fire – Dispatch4940134cT
Duchesne County FireDuchesne County Fire – Fire Ground4941134dT
Duchesne County FireSearch & Rescue49181336T
Duchesne County EMSEMS 1 Dispatch49451351T
Duchesne County EMSDuchesne County EMS – Tactical Channel49461352T
Duchesne County EMSCar to Car4927133fT

Radio system sites in Duchesne County

Program the control channel first; your scanner finds the voice channels from it.

Steamboat Mountain · Utah Communications Authority (P25)
Project 25 · RFSS 77 · Site 77 (hex 4D) · NAC 81D
Control 770.18125, 773.13125
Voice 771.31875, 771.46875, 772.48125, 772.66875, 772.91875
Tabby Mountain · Utah Communications Authority (P25)
Project 25 · RFSS 81 · Site 81 (hex 51) · NAC 821
Control 769.20625, 774.68125
Voice 771.20625, 771.40625, 773.81875, 774.05625
Roosevelt Hill · Utah Communications Authority (P25)
Project 25 · RFSS 87 · Site 87 (hex 57) · NAC 827
Control 769.26875, 773.74375
Voice 770.31875, 771.35625, 772.54375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Duchesne County

Common questions

What frequency does the fire department use in Duchesne County?

Fire dispatch channels listed for Duchesne County: Duchesne County Fire 155.0550 MHz, narrow FM, 114.8 PL; Ute Indian Tribe Fire 154.8900 MHz, narrow FM, 103.5 PL.

What frequency does EMS or the ambulance service use in Duchesne County?

EMS dispatch channels listed for Duchesne County: Duchesne County EMS 152.0075 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Duchesne County?

Yes. Fire and EMS talkgroups are listed for Utah Communications Authority (P25) (Project 25): 6 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Duchesne County?

The analog conventional channels can be heard on any scanner; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.

What are the control channels for trunked radio in Duchesne County?

For Duchesne County, start with the Steamboat Mountain site of Utah Communications Authority (P25). Its control channels are 770.18125, 773.13125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Duchesne County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for Duchesne County are marked encrypted.

Are Duchesne County fire and EMS talkgroups encrypted?

None of the 6 talkgroups listed for Duchesne County are marked encrypted.