About Flaming Gorge Fire and EMS Frequencies
Quick answer: County-level ems dispatch that covers Flaming Gorge: Daggett County EMS 155.0400 MHz, narrow FM, 103.5 PL. Trunked: Utah Communications Authority (P25) (Project 25), for example Daggett County Fire talkgroup 4942 (hex 134e).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Utah Communications Authority (P25) (Project 25): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Flaming Gorge, start with the East Park site of Utah Communications Authority (P25), about 4 miles away. Its control channels: 771.10625, 772.38125 MHz.
Data updated .
Daggett County channels that also cover Flaming Gorge
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Daggett County EMS | EMS Multicast (East Park) | 155.0400 In 151.2575 | 103.5 PL | FMN | WZX543 |
| Daggett County EMS | EMS Multicast (Goslin) | 156.0150 In 151.2575 | 103.5 PL | FMN | WZX543 |
Utah Communications Authority (P25)
Project 25 · System ID 00A
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Daggett County Fire | Daggett County Fire – Dispatch | 4942 | 134e | T |
| Daggett County Fire | Search & Rescue | 4919 | 1337 | T |
| Daggett County EMS | Daggett County EMS – Tactical Channel | 4953 | 1359 | T |
Nearest trunked radio sites
Distances are measured from the center of Flaming Gorge.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does EMS or the ambulance service use in Flaming Gorge?
We do not have a EMS dispatch channel listed specifically for Flaming Gorge. The county-level EMS dispatch channels in the same county: Daggett County EMS 155.0400 MHz, narrow FM, 103.5 PL.
Do fire departments and EMS use a trunked radio system in Flaming Gorge?
Yes. The county-level systems that cover Flaming Gorge are Fire and EMS talkgroups are listed for Utah Communications Authority (P25) (Project 25): 3 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Flaming Gorge?
The analog conventional channels can be heard on any scanner; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.
What are the control channels for trunked radio in Flaming Gorge?
For Flaming Gorge, start with the East Park site of Utah Communications Authority (P25). Its control channels are 771.10625, 772.38125 MHz. Program a control channel first; the scanner finds the voice channels from it.