About Corinne Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Corinne: Box Elder County Fire 154.3550 MHz, narrow FM, no tone. Trunked: Utah Communications Authority (P25) (Project 25), for example Box Elder County Fire talkgroup 4728 (hex 1278).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Utah Communications Authority (P25) (Project 25): 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Corinne, start with the Box Elder County Simulcast site of Utah Communications Authority (P25), about 7 miles away. Its control channels: 769.68125, 774.81875 MHz.
Data updated .
Box Elder County channels that also cover Corinne
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Box Elder County Fire | Fire/EMS Dispatch | 154.3550 | FMN | WPTF688 | |
| Box Elder County Fire | Fire/EMS/Sheriff West (Dunn Peak) | 154.8000 In 156.0150 | FMN | WGR640 | |
| Box Elder County Fire | Fire/EMS Paging | 156.0150 | FMN | KVI666 |
Utah Communications Authority (P25)
Project 25 · System ID 00A
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Box Elder County Fire | Box Elder County Fire – Dispatch | 4728 | 1278 | T |
| Box Elder County Fire | Box Elder County Fire – Dispatch | 4729 | 1279 | T |
| Box Elder County Fire | Sheriff Encrypted | 4727 | 1277 | T |
| Box Elder County Fire | Box Elder County Fire – Alternate | 4730 | 127a | T |
| Box Elder County Fire | Box Elder County Fire – Alternate | 4731 | 127b | T |
| Box Elder County Fire | Box Elder County Fire – Alternate | 4732 | 127c | T |
| Box Elder County Fire | Car to Car | 4756 | 1294 | T |
| Box Elder County Fire | Car to Car | 4766 | 129e | T |
Nearest trunked radio sites
Distances are measured from the center of Corinne.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Corinne?
We do not have a fire dispatch channel listed specifically for Corinne. The county-level fire dispatch channels in the same county: Box Elder County Fire 154.3550 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Corinne?
Yes. The county-level systems that cover Corinne are Fire and EMS talkgroups are listed for Utah Communications Authority (P25) (Project 25): 8 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Corinne?
The analog conventional channels can be heard on any scanner; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.
What are the control channels for trunked radio in Corinne?
For Corinne, start with the Box Elder County Simulcast site of Utah Communications Authority (P25). Its control channels are 769.68125, 774.81875 MHz. Program a control channel first; the scanner finds the voice channels from it.