Skip to content

Beaver County Fire and EMS Frequencies

Beaver County in Utah has 1 countywide conventional frequency and 6 countywide talkgroups in our database. Use the list of 3 cities and communities below for local fire departments and EMS agencies.

About Beaver County Fire and EMS Frequencies

Quick answer: EMS dispatch for Beaver County: Beaver County EMS 155.1150 MHz, narrow FM, 127.3 PL. Trunked: Utah Communications Authority (P25) (Project 25), for example Beaver County Fire talkgroup 7631 (hex 1dcf).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Utah Communications Authority (P25) (Project 25): 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Beaver County, start with the Eagle Point site of Utah Communications Authority (P25). Its control channels: 771.40625, 773.79375 MHz.

Data updated .

Beaver County conventional frequencies

EMS Dispatch

EMS Dispatch frequencies for Beaver County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Beaver County EMSBeaver County EMS – Dispatch155.1150
In 153.7850
127.3 PLFMNWPYM370

Beaver County trunked talkgroups

Utah Communications Authority (P25)

Project 25 · System ID 00A

Utah Communications Authority (P25) talkgroups
AgencyDescriptionTalkgroupHexMode
Beaver County FireWest76311dcfT
Beaver County FireEast76321dd0T
Beaver County FireBeaver County Fire – Tactical Channel – West76331dd1T
Beaver County FireBeaver County Fire – Tactical Channel – East76341dd2T
Beaver County EMSBeaver County EMS – Dispatch76271dcbT
Beaver County EMSBeaver County EMS – Alternate76281dccT

Radio system sites in Beaver County

Program the control channel first; your scanner finds the voice channels from it.

Eagle Point · Utah Communications Authority (P25)
Project 25 · RFSS 17 · Site 17 (hex 11) · NAC FB1
Control 771.40625, 773.79375
Voice 772.15625, 772.38125, 773.45625
Mountain Home · Utah Communications Authority (P25)
Project 25 · RFSS 129 · Site 129 (hex 81) · NAC 211
Control 769.18125, 772.48125
Voice 771.31875
Minersville · Utah Communications Authority (P25)
Project 25 · RFSS 137 · Site 137 (hex 89) · NAC 219
Control 769.86875, 774.23125
Voice 771.20625, 771.95625, 773.14375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Beaver County

Common questions

What frequency does EMS or the ambulance service use in Beaver County?

EMS dispatch channels listed for Beaver County: Beaver County EMS 155.1150 MHz, narrow FM, 127.3 PL.

Do fire departments and EMS use a trunked radio system in Beaver County?

Yes. Fire and EMS talkgroups are listed for Utah Communications Authority (P25) (Project 25): 6 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Beaver County?

The analog conventional channels can be heard on any scanner; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.

What are the control channels for trunked radio in Beaver County?

For Beaver County, start with the Eagle Point site of Utah Communications Authority (P25). Its control channels are 771.40625, 773.79375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Beaver County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Beaver County are marked encrypted.

Are Beaver County fire and EMS talkgroups encrypted?

None of the 6 talkgroups listed for Beaver County are marked encrypted.