Skip to content

Fort Worth Fire and EMS Frequencies

We do not have frequencies listed specifically for Fort Worth in Wise County, Texas yet. Countywide channels for Wise County that may also cover this area are shown below when we have them. The closest trunked radio site we have is NCTCOG Tarrant (Dallas P25 / NCTCOG), about 2 miles away.

Fort Worth also extends into Denton County, Johnson County, Parker County, Tarrant County.

About Fort Worth Fire and EMS Frequencies

Quick answer: Trunked: Wise County P25 (Project 25), for example Wise County Fire talkgroup 31001 (hex 7919).

  • Trunked radio systems that carry fire and EMS traffic here: Wise County P25 (Project 25): 11 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Fort Worth, start with the NCTCOG Tarrant site of Dallas P25 / NCTCOG, about 2 miles away. Its control channels: 771.08125, 771.33125, 771.73125 MHz.

Data updated .

Wise County channels that also cover Fort Worth

Wise County P25

Project 25

Wise County P25 talkgroups
AgencyDescriptionTalkgroupHexMode
Wise County FireWise County Fire – Dispatch310017919T
Wise County FireCounty Fire31002791aT
Wise County FireCounty Fire31003791bT
Wise County FireCounty Fire31004791cT
Wise County FireCounty Fire31005791dT
Wise County FireCounty Fire31006791eT
Wise County FireCounty Fire31007791fT
Wise County FireCounty Fire310087920T
Wise County FireCounty Fire310097921T
Wise County FireCounty Fire310107922T
Wise County FireCounty Fire310117923T

Nearest trunked radio sites

Distances are measured from the center of Fort Worth.

NCTCOG Tarrant · Dallas P25 / NCTCOG
Project 25 · RFSS 1 · Site 23 (hex 17) · NAC 370 · about 2 mi away
Control 771.08125, 771.33125, 771.73125
Voice 770.83125
Fort Worth Layer 2 simulcast · North Texas Interoperable Radio Network (NTIRN)
RFSS 1 · Site 2 (hex 2) · NAC 440 · about 3 mi away
Control 852.7375, 852.8625, 858.1375, 859.4375
Voice 851.2125, 851.2375, 851.2625, 851.3625, 851.3875, 851.7125, 851.7375, 851.7625, 851.8625, 851.8875, 852.2125, 852.2375, 852.3625, 852.3875, 852.7125, 852.8875, 856.4375, 856.4625
Fort Worth Layer 1 simulcast · North Texas Interoperable Radio Network (NTIRN)
RFSS 1 · Site 1 (hex 1) · NAC 440 · about 3 mi away
Control 857.4375, 857.4625, 858.4375, 858.4625
Voice 851.1625, 851.1875, 851.3125, 851.3375, 851.6625, 851.6875, 851.8125, 851.8375, 852.1625, 852.1875, 852.3125, 852.3375, 852.6625, 852.6875, 856.4375, 856.4625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

Do fire departments and EMS use a trunked radio system in Fort Worth?

Yes. The county-level systems that cover Fort Worth are Fire and EMS talkgroups are listed for Wise County P25 (Project 25): 11 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Fort Worth?

A trunking scanner that supports Project 25 is needed for the trunked talkgroups.

What are the control channels for trunked radio in Fort Worth?

For Fort Worth, start with the NCTCOG Tarrant site of Dallas P25 / NCTCOG. Its control channels are 771.08125, 771.33125, 771.73125 MHz. Program a control channel first; the scanner finds the voice channels from it.