Skip to content

Kermit Fire and EMS Frequencies

We do not have frequencies listed specifically for Kermit in Winkler County, Texas yet. Countywide channels for Winkler County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Notrees VHF (Greater Austin/Travis Regional Radio System (GATRRS)), about 19 miles away.

About Kermit Fire and EMS Frequencies

Quick answer: County-level ems dispatch that covers Kermit: Winkler County EMS 155.7150 MHz, P25, NAC 248.

  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Winkler County channels that also cover Kermit

EMS Dispatch

EMS Dispatch frequencies for Winkler County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Winkler County EMSWinkler County EMS – Dispatch155.7150NAC 248P25WPNW778

Nearest trunked radio sites

Distances are measured from the center of Kermit.

Notrees VHF · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 85 (hex 55) · NAC 130 · about 19 mi away
Control 154.3475, 155.0325
Voice 151.1975, 154.1075
Notrees 800 MHz · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 86 (hex 56) · NAC 130 · about 20 mi away
Control 855.7375, 856.7625, 857.7375, 858.2375
Odessa · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 92 (hex 5C) · NAC 130 · about 43 mi away
Control 774.06875, 774.53125
Voice 773.03125, 773.31875, 773.78125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does EMS or the ambulance service use in Kermit?

We do not have a EMS dispatch channel listed specifically for Kermit. The county-level EMS dispatch channels in the same county: Winkler County EMS 155.7150 MHz, P25, NAC 248.

What scanner do I need to listen to fire and EMS in Kermit?

A scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Kermit?

For Kermit, start with the Notrees VHF site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels are 154.3475, 155.0325 MHz. Program a control channel first; the scanner finds the voice channels from it.