About Four Points Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Four Points: Webb, County of 155.7000 MHz, FM, 131.8 PL. Trunked: Webb County, for example Webb County Fire talkgroup 46296 (hex b4d8).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Webb County: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Four Points, start with the Botines site of Greater Austin/Travis Regional Radio System (GATRRS), about 3 miles away. Its control channels: 151.1, 154.1525 MHz.
Data updated .
Webb County channels that also cover Four Points
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Webb, County of | Webb, County of – Dispatch /County Fire Rescue | 155.7000 In 154.8600 | 131.8 PL | FM | KVJ695 |
Webb County
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Webb County Fire | Webb County Fire – Dispatch | 46296 | b4d8 | D |
Nearest trunked radio sites
Distances are measured from the center of Four Points.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Four Points?
We do not have a fire dispatch channel listed specifically for Four Points. The county-level fire dispatch channels in the same county: Webb, County of 155.7000 MHz, FM, 131.8 PL.
Do fire departments and EMS use a trunked radio system in Four Points?
Yes. The county-level systems that cover Four Points are Fire and EMS talkgroups are listed for Webb County: 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Four Points?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Four Points?
For Four Points, start with the Botines site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels are 151.1, 154.1525 MHz. Program a control channel first; the scanner finds the voice channels from it.