Waller also extends into Harris County.
About Waller Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Waller: Waller County Fire 155.7600 MHz, narrow FM, 146.2 PL. Trunked: Texas Wide Area Radio Network (TxWARN), for example Waller Fire/EMS talkgroup 1004 (hex 3ec).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Texas Wide Area Radio Network (TxWARN): 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Waller, start with the Hempstead site of Texas Wide Area Radio Network (TxWARN), about 10 miles away. Its control channels: 771.56875, 772.94375 MHz.
Data updated .
Waller County channels that also cover Waller
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Waller County Fire | Waller County Fire – Dispatch /EMS Paging North (patched with TxWARN) | 155.7600 In 154.7850 | 146.2 PL | FMN | KWH351 |
| Waller County Fire | Waller County Fire – Dispatch /EMS Paging South (patched with TxWARN) | 159.1500 In 154.8300 | 125 DPL | FMN | WRDL958 |
Texas Wide Area Radio Network (TxWARN)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Waller Fire/EMS | Waller Fire/EMS – Dispatch | 1004 | 3ec | D |
| Waller Fire/EMS | Waller Fire/EMS – Tactical Channel | 944 | 3b0 | D |
| Waller Fire/EMS | Waller Fire/EMS – Tactical Channel | 950 | 3b6 | D |
| Waller Fire/EMS | Waller Fire/EMS – Tactical Channel | 952 | 3b8 | D |
| Waller Fire/EMS | Waller Fire/EMS – Tactical Channel | 954 | 3ba | D |
| Waller Fire/EMS | Waller Fire/EMS – Dispatch | 1006 | 3ee | D |
| Waller Fire/EMS | Waller Fire/EMS – Tactical Channel (MED")" | 1008 | 3f0 | D |
Nearest trunked radio sites
Distances are measured from the center of Waller.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Waller?
We do not have a fire dispatch channel listed specifically for Waller. The county-level fire dispatch channels in the same county: Waller County Fire 155.7600 MHz, narrow FM, 146.2 PL.
Do fire departments and EMS use a trunked radio system in Waller?
Yes. The county-level systems that cover Waller are Fire and EMS talkgroups are listed for Texas Wide Area Radio Network (TxWARN): 7 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Waller?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Waller?
For Waller, start with the Hempstead site of Texas Wide Area Radio Network (TxWARN). Its control channels are 771.56875, 772.94375 MHz. Program a control channel first; the scanner finds the voice channels from it.