About Brookshire Fire and EMS Frequencies
Quick answer: Fire dispatch for Brookshire: Brookshire Fire 155.5800 MHz, narrow FM, 233.6 PL. Trunked: Texas Wide Area Radio Network (TxWARN), for example Waller Fire/EMS talkgroup 1004 (hex 3ec).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Texas Wide Area Radio Network (TxWARN): 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Brookshire, start with the Wallis site of Texas Wide Area Radio Network (TxWARN), about 11 miles away. Its control channels: 772.46875, 772.84375 MHz.
Data updated .
Brookshire conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Brookshire Fire | Brookshire Fire – Tactical Channel | 155.5800 | 233.6 PL | FMN | WPJP272 |
Waller County channels that also cover Brookshire
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Waller County Fire | Waller County Fire – Dispatch /EMS Paging North (patched with TxWARN) | 155.7600 In 154.7850 | 146.2 PL | FMN | KWH351 |
| Waller County Fire | Waller County Fire – Dispatch /EMS Paging South (patched with TxWARN) | 159.1500 In 154.8300 | 125 DPL | FMN | WRDL958 |
Texas Wide Area Radio Network (TxWARN)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Waller Fire/EMS | Waller Fire/EMS – Dispatch | 1004 | 3ec | D |
| Waller Fire/EMS | Waller Fire/EMS – Tactical Channel | 944 | 3b0 | D |
| Waller Fire/EMS | Waller Fire/EMS – Tactical Channel | 950 | 3b6 | D |
| Waller Fire/EMS | Waller Fire/EMS – Tactical Channel | 952 | 3b8 | D |
| Waller Fire/EMS | Waller Fire/EMS – Tactical Channel | 954 | 3ba | D |
| Waller Fire/EMS | Waller Fire/EMS – Dispatch | 1006 | 3ee | D |
| Waller Fire/EMS | Waller Fire/EMS – Tactical Channel (MED")" | 1008 | 3f0 | D |
Nearest trunked radio sites
Distances are measured from the center of Brookshire.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Brookshire?
Fire dispatch channels listed for Brookshire: Brookshire Fire 155.5800 MHz, narrow FM, 233.6 PL.
Do fire departments and EMS use a trunked radio system in Brookshire?
Yes. The county-level systems that cover Brookshire are Fire and EMS talkgroups are listed for Texas Wide Area Radio Network (TxWARN): 7 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Brookshire?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Brookshire?
For Brookshire, start with the Wallis site of Texas Wide Area Radio Network (TxWARN). Its control channels are 772.46875, 772.84375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Brookshire fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Brookshire are marked encrypted.