Skip to content

Upton County Fire and EMS Frequencies

Upton County in Texas has 1 countywide conventional frequency and 1 countywide talkgroup in our database. Use the list of 3 cities and communities below for local fire departments and EMS agencies.

About Upton County Fire and EMS Frequencies

Quick answer: Fire dispatch for Upton County: Upton County Fire 154.4450 MHz, narrow FM, 107.2 PL. Trunked: Greater Austin/Travis Regional Radio System (GATRRS), for example Upton County EMS talkgroup 42475 (hex a5eb).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Greater Austin/Travis Regional Radio System (GATRRS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Upton County, start with the King Mountain (McCamey) site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels: 154.3175, 154.7475 MHz.

Data updated .

Upton County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Upton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Upton County FireUpton Co. Fire Association154.4450
In 153.8300
107.2 PLFMNKNCJ824

Upton County trunked talkgroups

Greater Austin/Travis Regional Radio System (GATRRS)

Greater Austin/Travis Regional Radio System (GATRRS) talkgroups
AgencyDescriptionTalkgroupHexMode
Upton County EMSUpton County EMS – Dispatch42475a5ebD

Radio system sites in Upton County

Program the control channel first; your scanner finds the voice channels from it.

King Mountain (McCamey) · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 83 (hex 53)
Control 154.3175, 154.7475
Voice 154.0925, 154.2425
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Upton County

Common questions

What frequency does the fire department use in Upton County?

Fire dispatch channels listed for Upton County: Upton County Fire 154.4450 MHz, narrow FM, 107.2 PL.

Do fire departments and EMS use a trunked radio system in Upton County?

Yes. Fire and EMS talkgroups are listed for Greater Austin/Travis Regional Radio System (GATRRS): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Upton County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Upton County?

For Upton County, start with the King Mountain (McCamey) site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels are 154.3175, 154.7475 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Upton County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Upton County are marked encrypted.

Are Upton County fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Upton County are marked encrypted.