Skip to content

Warren Fire and EMS Frequencies

We do not have frequencies listed specifically for Warren in Tyler County, Texas yet. Countywide channels for Tyler County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Bragg (Southeast Texas Regional Radio System (SETRRS) (P25)), about 16 miles away.

About Warren Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Warren: Tyler County Fire 155.8650 MHz, FM, 218.1 PL; Woodville, City of Fire 154.9650 MHz, FM, 192.8 PL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Tyler County channels that also cover Warren

Fire Dispatch

Fire Dispatch frequencies for Tyler County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Tyler County FireCounty Fire/EMS Dispatch155.8650
In 150.7750
218.1 PLFMWPWE423
Woodville, City of FireWoodville Fire Dispatch154.9650
In 156.0000
192.8 PLFMKGK690

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Tyler County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Tyler County FireCounty Fire Tactical155.0550FMWPWE423

Nearest trunked radio sites

Distances are measured from the center of Warren.

Bragg · Southeast Texas Regional Radio System (SETRRS) (P25)
Project 25 · RFSS 1 · Site 2 (hex 2) · about 16 mi away
Control 852.125, 853.85
Voice 851.25, 858.9625
Silsbee · Southeast Texas Regional Radio System (SETRRS) (P25)
Project 25 · RFSS 1 · Site 4 (hex 4) · about 23 mi away
Control 859.2625, 859.7125
Voice 856.7125, 857.7125, 858.7125
Livingston · Texas Wide Area Radio Network (TxWARN)
RFSS 2 · Site 11 (hex B) · NAC 1A0 · about 31 mi away
Control 770.71875, 773.05625
Voice 769.21875, 769.68125, 769.96875, 770.43125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Warren?

We do not have a fire dispatch channel listed specifically for Warren. The county-level fire dispatch channels in the same county: Tyler County Fire 155.8650 MHz, FM, 218.1 PL; Woodville, City of Fire 154.9650 MHz, FM, 192.8 PL.

What scanner do I need to listen to fire and EMS in Warren?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Warren?

For Warren, start with the Bragg site of Southeast Texas Regional Radio System (SETRRS) (P25). Its control channels are 852.125, 853.85 MHz. Program a control channel first; the scanner finds the voice channels from it.