Skip to content

Terrell County Fire and EMS Frequencies

Terrell County in Texas has 0 countywide conventional frequencies and 7 countywide talkgroups in our database. Use the list of 2 cities and communities below for local fire departments and EMS agencies.

About Terrell County Fire and EMS Frequencies

Quick answer: Trunked: Garland, Mesquite, Rowlett, Sachse (GMRS), for example Terrell County Fire talkgroup 611 (hex 263).

  • Trunked radio systems that carry fire and EMS traffic here: Garland, Mesquite, Rowlett, Sachse (GMRS): 1 talkgroup; Greater Austin/Travis Regional Radio System (GATRRS): 5 talkgroups; Kaufman County: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Terrell County, start with the Sanderson site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels: 152.6975, 154.1825 MHz.

Data updated .

Terrell County trunked talkgroups

Garland, Mesquite, Rowlett, Sachse (GMRS)

Garland, Mesquite, Rowlett, Sachse (GMRS) talkgroups
AgencyDescriptionTalkgroupHexMode
Terrell County FireTerrell County Fire – Dispatch611263T

Greater Austin/Travis Regional Radio System (GATRRS)

Greater Austin/Travis Regional Radio System (GATRRS) talkgroups
AgencyDescriptionTalkgroupHexMode
Terrell County FireTerrell County Fire – Dispatch42443a5cbD
Terrell County FireTerrell County Fire – Fire Ground42444a5ccD
Terrell County FireFire Talk42450a5d2D
Terrell County EMSTerrell County EMS – Dispatch42445a5cdD
Terrell County EMSTerrell County EMS – Tactical Channel42446a5ceD

Kaufman County

Kaufman County talkgroups
AgencyDescriptionTalkgroupHexMode
Terrell County FireTerrell County Fire – Fire Ground408198D

Radio system sites in Terrell County

Program the control channel first; your scanner finds the voice channels from it.

Sanderson · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 84 (hex 54)
Control 152.6975, 154.1825
Voice 154.355, 154.7325
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Terrell County

Common questions

Do fire departments and EMS use a trunked radio system in Terrell County?

Yes. Fire and EMS talkgroups are listed for Garland, Mesquite, Rowlett, Sachse (GMRS): 1 talkgroup; Greater Austin/Travis Regional Radio System (GATRRS): 5 talkgroups; Kaufman County: 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Terrell County?

A trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Terrell County?

For Terrell County, start with the Sanderson site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels are 152.6975, 154.1825 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Terrell County fire and EMS talkgroups encrypted?

None of the 7 talkgroups listed for Terrell County are marked encrypted.