About Somervell County Fire and EMS Frequencies
Quick answer: Fire dispatch for Somervell County: Somervell County Fire 453.8750 MHz, P25, NAC 193. Trunked: Granbury Regional Radio Network, for example Somervell County Fire talkgroup 1137 (hex 471).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
- Trunked radio systems that carry fire and EMS traffic here: Granbury Regional Radio Network: 17 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Somervell County, start with the Glen Rose site of Granbury Regional Radio Network. Its control channels: 770.04375, 771.05625, 772.30625 MHz.
- 1 listed entry is marked encrypted. No scanner can decode encrypted audio.
Data updated .
Somervell County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Somervell County Fire | Somervell County Fire – Dispatch | 453.8750 In 458.8750 | NAC 193 | P25 | WPKY542 |
| Somervell County Fire | Fire Analog | 453.8750 In 458.8750 | 71.9 PL | FMN | WPKT542 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Somervell County Fire | Fire Mobile | 458.9750 | FMN | WQGN878 |
Somervell County trunked talkgroups
Granbury Regional Radio Network
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Somervell County Fire | Fire Paging | 1137 | 471 | D |
| Somervell County Fire | Somervell County Fire – Tactical Channel | 1112 | 458 | D |
| Somervell County Fire | Somervell County Fire – Tactical Channel | 1113 | 459 | D |
| Somervell County Fire | Somervell County Fire – Tactical Channel | 1114 | 45a | D |
| Somervell County Fire | Somervell County Fire – Tactical Channel | 1115 | 45b | D |
| Somervell County Fire | Somervell County Fire – Tactical Channel | 1116 | 45c | D |
| Somervell County Fire | Somervell County Fire – Tactical Channel | 1117 | 45d | D |
| Somervell County Fire | Fire Administration | 1111 | 457 | D |
| Somervell County Fire | Fire Talk | 1124 | 464 | D |
| Somervell County Fire | Fire Talk | 1125 | 465 | D |
| Somervell County Fire | Fire Operations | 1138 | 472 | D |
| Somervell County EMS | Fire EMS | 1126 | 466 | D |
| Somervell County EMS | Fire EMS | 1127 | 467 | D |
| Somervell County EMS | Fire EMS | 1128 | 468 | D |
| Somervell County EMS | Fire EMS | 1129 | 469 | D |
| Somervell County Hospital | Glen Rose Medical Center – Patient Reports | 1140 | 474 | D |
1 encrypted talkgroup (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Somervell County Fire | Somervell County Fire – Dispatch | 1110 | 456 | D Encrypted |
Radio system sites in Somervell County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Somervell County
Common questions
What frequency does the fire department use in Somervell County?
Fire dispatch channels listed for Somervell County: Somervell County Fire 453.8750 MHz, P25, NAC 193.
Do fire departments and EMS use a trunked radio system in Somervell County?
Yes. Fire and EMS talkgroups are listed for Granbury Regional Radio Network: 17 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Somervell County?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Somervell County?
For Somervell County, start with the Glen Rose site of Granbury Regional Radio Network. Its control channels are 770.04375, 771.05625, 772.30625, 773.96875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Somervell County fire and EMS frequencies encrypted?
None of the 3 conventional frequencies listed for Somervell County are marked encrypted.
Are Somervell County fire and EMS talkgroups encrypted?
1 of the 17 talkgroups listed for Somervell County are marked fully or partly encrypted; a scanner cannot decode encrypted audio.