About Shepherd Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Shepherd: San Jacinto, County of 155.7825 MHz, narrow FM, 123.0 PL. County-level ems dispatch that covers Shepherd: San Jacinto, County of 155.9775 MHz, narrow FM, 192.8 PL.
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
San Jacinto County channels that also cover Shepherd
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| San Jacinto, County of | San Jacinto, County of – Dispatch | 155.7825 In 159.1275 | 123.0 PL | FMN | WQDA616 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| San Jacinto, County of | San Jacinto, County of – Fire Ground | 154.4450 | 123.0 PL | FM | WRZ822 |
| San Jacinto, County of | Emergency Management, South Fire Operations | 155.6925 In 158.8725 | 192.8 PL | FMN | WQFT874 |
| Waterwood Volunteer Fire Department | Waterwood Fireground | 154.1600 | 123.0 PL | FM | WPVT933 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| San Jacinto, County of | San Jacinto, County of – Dispatch (Allegiance Ambulance) | 155.9775 In 159.0525 | 192.8 PL | FMN | WQFW945 |
Nearest trunked radio sites
Distances are measured from the center of Shepherd.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Shepherd?
We do not have a fire dispatch channel listed specifically for Shepherd. The county-level fire dispatch channels in the same county: San Jacinto, County of 155.7825 MHz, narrow FM, 123.0 PL.
What frequency does EMS or the ambulance service use in Shepherd?
We do not have a EMS dispatch channel listed specifically for Shepherd. The county-level EMS dispatch channels in the same county: San Jacinto, County of 155.9775 MHz, narrow FM, 192.8 PL.
What scanner do I need to listen to fire and EMS in Shepherd?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Shepherd?
For Shepherd, start with the Moss Hill site of Texas Wide Area Radio Network (TxWARN). Its control channels are 853.4625, 853.6625 MHz. Program a control channel first; the scanner finds the voice channels from it.