Skip to content

Woodsboro Fire and EMS Frequencies

Woodsboro in Refugio County, Texas has 2 conventional frequencies and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Sinton (Coastal Bend Regional Interoperability Network), about 18 miles away.

About Woodsboro Fire and EMS Frequencies

Quick answer: Fire dispatch for Woodsboro: Woodsboro FD Fire 159.1950 MHz, FM, 167.9 PL. County-level ems dispatch that covers Woodsboro: Refugio County EMS 155.4900 MHz, FM, 173.8 PL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Woodsboro conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Woodsboro
AgencyDescriptionFrequency (MHz)ToneModeFCC
Woodsboro FD FireWoodsboro Fire Department Fire – Dispatch159.1950
In 154.0700
167.9 PLFMWPOZ995

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Woodsboro
AgencyDescriptionFrequency (MHz)ToneModeFCC
Woodsboro FD FireWoodsboro Fire Department Fire – Tactical Channel154.3025
In 158.9250
125 DPLFMWNXU355

Refugio County channels that also cover Woodsboro

Fire Dispatch

Fire Dispatch frequencies for Refugio County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Refugio County FireCountywide Fire Dispatch158.8200
In 153.9800
167.9 PLFMNWPNQ860

EMS Dispatch

EMS Dispatch frequencies for Refugio County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Refugio County EMSRefugio County EMS – Dispatch155.4900
In 158.9850
173.8 PLFMWNAE954

Nearest trunked radio sites

Distances are measured from the center of Woodsboro.

Sinton · Coastal Bend Regional Interoperability Network
RFSS 41 · Site 41 (hex 29) · NAC 33 · about 18 mi away
Control 851.2375, 851.925, 852.2375, 852.95, 853.925
Rockport · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 2 · Site 51 (hex 33) · NAC 130 · about 21 mi away
Control 773.04375, 773.33125
Voice 770.70625, 774.54375
Portland · Coastal Bend Regional Interoperability Network
RFSS 47 · Site 47 (hex 2F) · NAC A · about 24 mi away
Control 851.3375, 852.3375, 852.8875, 853.3375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Woodsboro?

Fire dispatch channels listed for Woodsboro: Woodsboro FD Fire 159.1950 MHz, FM, 167.9 PL.

What frequency does EMS or the ambulance service use in Woodsboro?

We do not have a EMS dispatch channel listed specifically for Woodsboro. The county-level EMS dispatch channels in the same county: Refugio County EMS 155.4900 MHz, FM, 173.8 PL.

What scanner do I need to listen to fire and EMS in Woodsboro?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Woodsboro?

For Woodsboro, start with the Sinton site of Coastal Bend Regional Interoperability Network. Its control channels are 851.2375, 851.925, 852.2375, 852.95 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Woodsboro fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Woodsboro are marked encrypted.