Skip to content

Marfa Fire and EMS Frequencies

Marfa in Presidio County, Texas has 2 conventional frequencies and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Gomez Peak (Greater Austin/Travis Regional Radio System (GATRRS)), about 50 miles away.

About Marfa Fire and EMS Frequencies

Quick answer: Fire dispatch for Marfa: Marfa Fire 154.1000 MHz, narrow FM, no tone.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Marfa conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Marfa
AgencyDescriptionFrequency (MHz)ToneModeFCC
Marfa FireMarfa EMS/Fire Paging154.1000FMNWPXD746

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Marfa
AgencyDescriptionFrequency (MHz)ToneModeFCC
Marfa FireMarfa Fire – Tactical Channel155.0550CSQFMNWQHS605

Nearest trunked radio sites

Distances are measured from the center of Marfa.

Gomez Peak · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 80 (hex 50) · about 50 mi away
Control 152.5775, 154.3325
Voice 151.2125, 155.235
Glass Mountain (Marathon) · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 81 (hex 51) · about 53 mi away
Control 155.1825, 155.3025
Voice 152.6375, 154.8825
Sanderson · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 84 (hex 54) · about 98 mi away
Control 152.6975, 154.1825
Voice 154.355, 154.7325
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Marfa?

Fire dispatch channels listed for Marfa: Marfa Fire 154.1000 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Marfa?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Marfa?

For Marfa, start with the Gomez Peak site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels are 152.5775, 154.3325 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Marfa fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Marfa are marked encrypted.