Skip to content

Polk County Fire and EMS Frequencies

Polk County in Texas has 3 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 19 cities and communities below for local fire departments and EMS agencies.

About Polk County Fire and EMS Frequencies

Quick answer: Fire dispatch for Polk County: Alabama Coushatta Tribe of Texas Fire 151.2500 MHz, narrow FM, 146.2 PL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Polk County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Polk County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Alabama Coushatta Tribe of Texas FireFire / Forestry Dispatch151.2500146.2 PLFMNWNVY683
Alabama Coushatta Tribe of Texas FireFire/Rescue Dispatch154.2275
In 158.8800
NAC 064P25WQLM274

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Polk County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Alabama Coushatta Tribe of Texas FireAlabama Coushatta Tribe of Texas Fire – Tactical Channel154.4500151.4 PLFMN—

Radio system sites in Polk County

Program the control channel first; your scanner finds the voice channels from it.

Livingston · Texas Wide Area Radio Network (TxWARN)
RFSS 2 · Site 11 (hex B) · NAC 1A0
Control 770.71875, 773.05625
Voice 769.21875, 769.68125, 769.96875, 770.43125
Corrigan · Texas Wide Area Radio Network (TxWARN)
RFSS 2 · Site 15 (hex F)
Control 859.7375, 859.9875
Voice 858.4875, 858.9375, 859.2125, 859.4625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Polk County

Common questions

What frequency does the fire department use in Polk County?

Fire dispatch channels listed for Polk County: Alabama Coushatta Tribe of Texas Fire 151.2500 MHz, narrow FM, 146.2 PL.

What scanner do I need to listen to fire and EMS in Polk County?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Polk County?

For Polk County, start with the Livingston site of Texas Wide Area Radio Network (TxWARN). Its control channels are 770.71875, 773.05625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Polk County fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Polk County are marked encrypted.