Skip to content

Ingleside Fire and EMS Frequencies

We do not have frequencies listed specifically for Ingleside in Nueces County, Texas yet. Countywide channels for Nueces County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Ingleside (Coastal Bend Regional Interoperability Network), about 1 miles away.

About Ingleside Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Ingleside: Nueces County Fire 153.7400 MHz, narrow FM, 167.9 PL. Trunked: Coastal Bend Regional Interoperability Network, for example Nueces County Fire/EMS talkgroup 20593 (hex 5071).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: Coastal Bend Regional Interoperability Network: 9 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Ingleside, start with the Ingleside site of Coastal Bend Regional Interoperability Network, about 1 miles away. Its control channels: 851.15, 851.7125, 852.15 MHz.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Data updated .

Nueces County channels that also cover Ingleside

Fire Dispatch

Fire Dispatch frequencies for Nueces County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Nueces County FireESD #2 (Flour Bluff) Fire Dispatch153.7400
In 155.8800
167.9 PLFMNKNHZ251
Nueces County FireESD #4 (Bluntzer) Dispatch153.7700123.0 PLFMNWPFQ860
Nueces County FireESD #1 (Annaville Fire Department) Dispatch154.2350162.2 PLFMNKBN495
Nueces County FireESD #3 (Bishop & Driscoll) Fire Dispatch154.3100
In 158.8875
NAC 100P25WPYC282
Nueces County FireESD #3 (Bishop & Driscoll) Repeater154.4300
In 153.9500
167.9 PLFMNWPYC282

Coastal Bend Regional Interoperability Network

System ID 051

Coastal Bend Regional Interoperability Network talkgroups
AgencyDescriptionTalkgroupHexMode
Nueces County Fire/EMSAnnaville Fire Department Dispatch205935071T
Nueces County Fire/EMSBluntzer Volunteer Fire Department Dispatch206255091T
ICS 11 FireICS 11 Fire Tactical21307533bT
Nueces County Fire/EMSDrone Operations205855069T
Nueces County Fire/EMSDrone Operations20586506aT
Nueces County Fire/EMSAnnaville Fire Department Officers205965074T
Halo Flight EMSHalo Flight EMS Dispatch2199055e6T
ICS 13 EMSICS 13 EMS Command21309533dT
1 encrypted talkgroup (cannot be monitored)
Coastal Bend Regional Interoperability Network encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
ICS 9 FireICS 9 Fire Command213055339T Encrypted

Nearest trunked radio sites

Distances are measured from the center of Ingleside.

Ingleside · Coastal Bend Regional Interoperability Network
RFSS 45 · Site 45 (hex 2D) · NAC 37 · about 1 mi away
Control 851.15, 851.7125, 852.15, 852.7125, 853.7125
Portland · Coastal Bend Regional Interoperability Network
RFSS 47 · Site 47 (hex 2F) · NAC A · about 7 mi away
Control 851.3375, 852.3375, 852.8875, 853.3375
Port Aransas · Coastal Bend Regional Interoperability Network
RFSS 9 · Site 9 (hex 9) · NAC 13 · about 9 mi away
Control 858.9875, 859.2625, 859.4875, 859.9875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Ingleside?

We do not have a fire dispatch channel listed specifically for Ingleside. The county-level fire dispatch channels in the same county: Nueces County Fire 153.7400 MHz, narrow FM, 167.9 PL.

Do fire departments and EMS use a trunked radio system in Ingleside?

Yes. The county-level systems that cover Ingleside are Fire and EMS talkgroups are listed for Coastal Bend Regional Interoperability Network: 9 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Ingleside?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Ingleside?

For Ingleside, start with the Ingleside site of Coastal Bend Regional Interoperability Network. Its control channels are 851.15, 851.7125, 852.15, 852.7125 MHz. Program a control channel first; the scanner finds the voice channels from it.