About Driscoll Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Driscoll: Nueces County Fire 153.7400 MHz, narrow FM, 167.9 PL. Trunked: Coastal Bend Regional Interoperability Network, for example Nueces County Fire/EMS talkgroup 20593 (hex 5071).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
- Trunked radio systems that carry fire and EMS traffic here: Coastal Bend Regional Interoperability Network: 9 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Driscoll, start with the Robstown site of Coastal Bend Regional Interoperability Network, about 10 miles away. Its control channels: 854.9875, 855.7375, 855.9875 MHz.
- 1 listed entry is marked encrypted. No scanner can decode encrypted audio.
Data updated .
Nueces County channels that also cover Driscoll
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Nueces County Fire | ESD #2 (Flour Bluff) Fire Dispatch | 153.7400 In 155.8800 | 167.9 PL | FMN | KNHZ251 |
| Nueces County Fire | ESD #4 (Bluntzer) Dispatch | 153.7700 | 123.0 PL | FMN | WPFQ860 |
| Nueces County Fire | ESD #1 (Annaville Fire Department) Dispatch | 154.2350 | 162.2 PL | FMN | KBN495 |
| Nueces County Fire | ESD #3 (Bishop & Driscoll) Fire Dispatch | 154.3100 In 158.8875 | NAC 100 | P25 | WPYC282 |
| Nueces County Fire | ESD #3 (Bishop & Driscoll) Repeater | 154.4300 In 153.9500 | 167.9 PL | FMN | WPYC282 |
Coastal Bend Regional Interoperability Network
System ID 051
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Nueces County Fire/EMS | Annaville Fire Department Dispatch | 20593 | 5071 | T |
| Nueces County Fire/EMS | Bluntzer Volunteer Fire Department Dispatch | 20625 | 5091 | T |
| ICS 11 Fire | ICS 11 Fire Tactical | 21307 | 533b | T |
| Nueces County Fire/EMS | Drone Operations | 20585 | 5069 | T |
| Nueces County Fire/EMS | Drone Operations | 20586 | 506a | T |
| Nueces County Fire/EMS | Annaville Fire Department Officers | 20596 | 5074 | T |
| Halo Flight EMS | Halo Flight EMS Dispatch | 21990 | 55e6 | T |
| ICS 13 EMS | ICS 13 EMS Command | 21309 | 533d | T |
1 encrypted talkgroup (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| ICS 9 Fire | ICS 9 Fire Command | 21305 | 5339 | T Encrypted |
Nearest trunked radio sites
Distances are measured from the center of Driscoll.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Driscoll?
We do not have a fire dispatch channel listed specifically for Driscoll. The county-level fire dispatch channels in the same county: Nueces County Fire 153.7400 MHz, narrow FM, 167.9 PL.
Do fire departments and EMS use a trunked radio system in Driscoll?
Yes. The county-level systems that cover Driscoll are Fire and EMS talkgroups are listed for Coastal Bend Regional Interoperability Network: 9 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Driscoll?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Driscoll?
For Driscoll, start with the Robstown site of Coastal Bend Regional Interoperability Network. Its control channels are 854.9875, 855.7375, 855.9875, 857.0875 MHz. Program a control channel first; the scanner finds the voice channels from it.