Skip to content

Call Fire and EMS Frequencies

We do not have frequencies listed specifically for Call in Newton County, Texas yet. Countywide channels for Newton County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Silsbee (Southeast Texas Regional Radio System (SETRRS) (P25)), about 27 miles away.

About Call Fire and EMS Frequencies

Quick answer: County-level ems dispatch that covers Call: Newton County EMS 155.3850 MHz, FM, 127.3 PL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Newton County channels that also cover Call

EMS Dispatch

EMS Dispatch frequencies for Newton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Newton County EMSSouth Newton County ESD #1 – EMS Dispatch155.3850
In 150.7900
127.3 PLFMWNAL558

Nearest trunked radio sites

Distances are measured from the center of Call.

Silsbee · Southeast Texas Regional Radio System (SETRRS) (P25)
Project 25 · RFSS 1 · Site 4 (hex 4) · about 27 mi away
Control 859.2625, 859.7125
Voice 856.7125, 857.7125, 858.7125
Primary · Orange County
Site 5 (hex 5) · about 27 mi away
Control 857.4375, 858.4375, 859.4375
Voice 854.3875, 854.9625, 855.2125, 856.4375
Vidor · Southeast Texas Regional Radio System (SETRRS) (P25)
Project 25 · RFSS 1 · Site 8 (hex 8) · NAC 4E0 · about 32 mi away
Control 773.09375, 773.28125
Voice 769.44375, 769.90625, 770.44375, 770.90625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does EMS or the ambulance service use in Call?

We do not have a EMS dispatch channel listed specifically for Call. The county-level EMS dispatch channels in the same county: Newton County EMS 155.3850 MHz, FM, 127.3 PL.

What scanner do I need to listen to fire and EMS in Call?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Call?

For Call, start with the Silsbee site of Southeast Texas Regional Radio System (SETRRS) (P25). Its control channels are 859.2625, 859.7125 MHz. Program a control channel first; the scanner finds the voice channels from it.