About Daingerfield Police Frequencies
Quick answer: County-level dispatch that covers Daingerfield: Morris County Sheriff 154.8750 MHz, P25, NAC 151.
- 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Morris County channels that also cover Daingerfield
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Morris County Sheriff | Morris County Sheriff – Dispatch | 154.8750 In 155.5350 | NAC 151 | P25 | KNBT356 |
Nearest trunked radio sites
Distances are measured from the center of Daingerfield.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Daingerfield?
We do not have a dispatch channel listed specifically for Daingerfield. The county sheriff's dispatch channels in the same county: Morris County Sheriff 154.8750 MHz, P25, NAC 151.
What scanner do I need to listen to police in Daingerfield?
A scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Daingerfield?
For Daingerfield, start with the Mount Pleasant site of Texas Wide Area Radio Network (TxWARN). Its control channels are 770.51875, 770.80625 MHz. Program a control channel first; the scanner finds the voice channels from it.