Skip to content

Midland County Fire and EMS Frequencies

Midland County in Texas has 1 countywide conventional frequency and 4 countywide talkgroups in our database. Use the list of 9 cities and communities below for local fire departments and EMS agencies.

About Midland County Fire and EMS Frequencies

Quick answer: Fire dispatch for Midland County: Midland County Fire 154.3700 MHz, narrow FM, 073 DPL. Trunked: Greater Austin/Travis Regional Radio System (GATRRS), for example Midland County Fire talkgroup 42338 (hex a562).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Greater Austin/Travis Regional Radio System (GATRRS): 2 talkgroups; Permian Basin Interoperable Radio Communications System: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Midland County, start with the Gardendale 800 MHz site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels: 856.2375, 856.7375 MHz.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Data updated .

Midland County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Midland County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Midland County FireCounty Fire Primary154.3700
In 156.0150
073 DPLFMNKVJ918

Midland County trunked talkgroups

Greater Austin/Travis Regional Radio System (GATRRS)

Greater Austin/Travis Regional Radio System (GATRRS) talkgroups
AgencyDescriptionTalkgroupHexMode
Midland County FireVolunteer Fire Dispatch42338a562D
Midland County FireNortheast Volunteer Fire Department42340a564D

Permian Basin Interoperable Radio Communications System

Permian Basin Interoperable Radio Communications System talkgroups
AgencyDescriptionTalkgroupHexMode
Midland International Air and Space Port FireFire/EMS Training44124ac5cT
1 encrypted talkgroup (cannot be monitored)
Permian Basin Interoperable Radio Communications System encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
Midland International Air and Space Port FireAirport Fire Tactical44107ac4bT Encrypted

Radio system sites in Midland County

Program the control channel first; your scanner finds the voice channels from it.

Gardendale 800 MHz · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 88 (hex 58) · NAC 130
Control 856.2375, 856.7375
Voice 855.2125, 858.7375, 859.2375, 859.7375
Midland VHF · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 90 (hex 5A) · NAC 130
Control 151.2875, 151.4525
Voice 151.1675, 154.1675, 154.3325
Midland 800 MHz · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 91 (hex 5B) · NAC 130
Control 855.7125, 857.9375
Voice 854.9875
Midland County Simulcast · Permian Basin Interoperable Radio Communications System
RFSS 1 · Site 2 (hex 2) · NAC BB0
Control 772.93125, 773.93125, 774.41875, 774.90625
Voice 771.49375, 771.99375
Midland City Simulcast · Permian Basin Interoperable Radio Communications System
RFSS 1 · Site 3 (hex 3) · NAC BB3
Control 858.2625, 858.4625, 858.7125, 859.4625
Voice 855.4625, 856.2625, 856.4625, 856.7125, 857.2625, 857.4625, 857.7125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Midland County

Common questions

What frequency does the fire department use in Midland County?

Fire dispatch channels listed for Midland County: Midland County Fire 154.3700 MHz, narrow FM, 073 DPL.

Do fire departments and EMS use a trunked radio system in Midland County?

Yes. Fire and EMS talkgroups are listed for Greater Austin/Travis Regional Radio System (GATRRS): 2 talkgroups; Permian Basin Interoperable Radio Communications System: 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Midland County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Midland County?

For Midland County, start with the Gardendale 800 MHz site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels are 856.2375, 856.7375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Midland County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Midland County are marked encrypted.

Are Midland County fire and EMS talkgroups encrypted?

1 of the 4 talkgroups listed for Midland County are marked fully or partly encrypted; a scanner cannot decode encrypted audio.