Skip to content

Melvin Fire and EMS Frequencies

We do not have frequencies listed specifically for Melvin in McCulloch County, Texas yet. Countywide channels for McCulloch County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Mason (Greater Austin/Travis Regional Radio System (GATRRS)), about 40 miles away.

About Melvin Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Melvin: McCulloch County Fire 155.0400 MHz, narrow FM, 97.4 PL. County-level ems dispatch that covers Melvin: McCulloch County EMS 155.4225 MHz, narrow FM, 151.4 PL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

McCulloch County channels that also cover Melvin

Fire Dispatch

Fire Dispatch frequencies for McCulloch County
AgencyDescriptionFrequency (MHz)ToneModeFCC
McCulloch County FireMcCulloch County Fire – Dispatch155.0400
In 158.7600
97.4 PLFMNWPMT858
McCulloch County FireDispatch Analog, Fire Paging155.5800
In 154.7250
97.4 PLFMNWPTQ874

EMS Dispatch

EMS Dispatch frequencies for McCulloch County
AgencyDescriptionFrequency (MHz)ToneModeFCC
McCulloch County EMSMcCulloch County EMS – Dispatch (Multicast with 155.040)155.4225
In 153.9725
151.4 PLFMNWPTQ874

Nearest trunked radio sites

Distances are measured from the center of Melvin.

Mason · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 54 (hex 36) · NAC 130 · about 40 mi away
Control 151.2425, 154.7475
Voice 151.0925, 154.1975
Site 10 · San Angelo (P25)
Project 25 · RFSS 0 · Site 10 (hex A) · NAC 014 · about 54 mi away
Control 854.9625, 855.2125, 855.7375, 855.9875, 857.4625, 858.4625, 859.4625, 859.9375
Llano North · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 75 (hex 4B) · NAC 135 · about 65 mi away
Control 152.1125, 152.7125
Voice 152.5775
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Melvin?

We do not have a fire dispatch channel listed specifically for Melvin. The county-level fire dispatch channels in the same county: McCulloch County Fire 155.0400 MHz, narrow FM, 97.4 PL.

What frequency does EMS or the ambulance service use in Melvin?

We do not have a EMS dispatch channel listed specifically for Melvin. The county-level EMS dispatch channels in the same county: McCulloch County EMS 155.4225 MHz, narrow FM, 151.4 PL.

What scanner do I need to listen to fire and EMS in Melvin?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Melvin?

For Melvin, start with the Mason site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels are 151.2425, 154.7475 MHz. Program a control channel first; the scanner finds the voice channels from it.