Skip to content

Mason County Fire and EMS Frequencies

Mason County in Texas has 1 countywide conventional frequency and 0 countywide talkgroups in our database. Use the list of 19 cities and communities below for local fire departments and EMS agencies.

About Mason County Fire and EMS Frequencies

Quick answer: Fire dispatch for Mason County: Mason County Fire 154.3400 MHz, narrow FM, 97.4 PL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Mason County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Mason County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Mason County FireFire Primary154.3400
In 153.8300
97.4 PLFMNWNQJ908

Radio system sites in Mason County

Program the control channel first; your scanner finds the voice channels from it.

Mason · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 54 (hex 36) · NAC 130
Control 151.2425, 154.7475
Voice 151.0925, 154.1975
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Mason County

Common questions

What frequency does the fire department use in Mason County?

Fire dispatch channels listed for Mason County: Mason County Fire 154.3400 MHz, narrow FM, 97.4 PL.

What scanner do I need to listen to fire and EMS in Mason County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Mason County?

For Mason County, start with the Mason site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels are 151.2425, 154.7475 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Mason County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Mason County are marked encrypted.