Skip to content

Lee County Fire and EMS Frequencies

Lee County in Texas has 1 countywide conventional frequency and 7 countywide talkgroups in our database. Use the list of 8 cities and communities below for local fire departments and EMS agencies.

About Lee County Fire and EMS Frequencies

Quick answer: Fire dispatch for Lee County: Lee County Fire 154.7550 MHz, narrow FM, 186.2 PL. Trunked: Greater Austin/Travis Regional Radio System (GATRRS), for example Lee County Fire talkgroup 5842 (hex 16d2).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Greater Austin/Travis Regional Radio System (GATRRS): 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Lee County, start with the Lee County site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels: 851.65, 853.475, 853.725 MHz.

Data updated .

Lee County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Lee County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Lee County FireFire/EMS Dispatch154.7550
In 155.6850
186.2 PLFMNWPZR913

Lee County trunked talkgroups

Greater Austin/Travis Regional Radio System (GATRRS)

Greater Austin/Travis Regional Radio System (GATRRS) talkgroups
AgencyDescriptionTalkgroupHexMode
Lee County FireFire/EMS Dispatch584216d2D
Lee County FireFedor Fire Tactical585316ddD
Lee County FireBlue Fire Tactical585716e1D
Lee County FireTanglewood Fire Tactical585816e2D
Lee County FirePost Oak Fire Tactical585916e3D
Lee County FireSouth Lee County Fire Tactical586416e8D
Lee County EMSB and M EMS Tactical585516dfD

Radio system sites in Lee County

Program the control channel first; your scanner finds the voice channels from it.

Lee County · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 43 (hex 2B) · NAC 130
Control 851.65, 853.475, 853.725
Voice 851.2, 852.4375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Lee County

Common questions

What frequency does the fire department use in Lee County?

Fire dispatch channels listed for Lee County: Lee County Fire 154.7550 MHz, narrow FM, 186.2 PL.

Do fire departments and EMS use a trunked radio system in Lee County?

Yes. Fire and EMS talkgroups are listed for Greater Austin/Travis Regional Radio System (GATRRS): 7 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Lee County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Lee County?

For Lee County, start with the Lee County site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels are 851.65, 853.475, 853.725 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Lee County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Lee County are marked encrypted.

Are Lee County fire and EMS talkgroups encrypted?

None of the 7 talkgroups listed for Lee County are marked encrypted.