Skip to content

Lampasas County Fire and EMS Frequencies

Lampasas County in Texas has 1 countywide conventional frequency and 0 countywide talkgroups in our database. Use the list of 5 cities and communities below for local fire departments and EMS agencies.

About Lampasas County Fire and EMS Frequencies

Quick answer: EMS dispatch for Lampasas County: Metroplex Hospital (Lampasas EMS) 463.1500 MHz, narrow FM, 152 DPL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Lampasas County conventional frequencies

EMS Dispatch

EMS Dispatch frequencies for Lampasas County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Metroplex Hospital (Lampasas EMS)Lampasas EMS Dispatch463.1500
In 468.1500
152 DPLFMNWPCB414

Radio system sites in Lampasas County

Program the control channel first; your scanner finds the voice channels from it.

Lampasas · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 68 (hex 44) · NAC 135
Control 156.165, 159.4275
Voice 158.85, 159.135, 159.195
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Lampasas County

Common questions

What frequency does EMS or the ambulance service use in Lampasas County?

EMS dispatch channels listed for Lampasas County: Metroplex Hospital (Lampasas EMS) 463.1500 MHz, narrow FM, 152 DPL.

What scanner do I need to listen to fire and EMS in Lampasas County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Lampasas County?

For Lampasas County, start with the Lampasas site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels are 156.165, 159.4275 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Lampasas County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Lampasas County are marked encrypted.