About La Salle County Fire and EMS Frequencies
Quick answer: Fire dispatch for La Salle County: La Salle County Fire 155.5650 MHz, narrow FM, 186.2 PL. Trunked: Greater Austin/Travis Regional Radio System (GATRRS), for example La Salle County Fire talkgroup 4154 (hex 103a).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Greater Austin/Travis Regional Radio System (GATRRS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For La Salle County, start with the Cotulla site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels: 154.4075, 155.3025 MHz.
Data updated .
La Salle County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| La Salle County Fire | Fire/EMS Dispatch (primary on GATRRS) | 155.5650 In 154.8300 | 186.2 PL | FMN | KVF514 |
La Salle County trunked talkgroups
Greater Austin/Travis Regional Radio System (GATRRS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| La Salle County Fire | Fire/EMS Primary (toned on VHF) | 4154 | 103a | D |
Radio system sites in La Salle County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in La Salle County
Common questions
What frequency does the fire department use in La Salle County?
Fire dispatch channels listed for La Salle County: La Salle County Fire 155.5650 MHz, narrow FM, 186.2 PL.
Do fire departments and EMS use a trunked radio system in La Salle County?
Yes. Fire and EMS talkgroups are listed for Greater Austin/Travis Regional Radio System (GATRRS): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in La Salle County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in La Salle County?
For La Salle County, start with the Cotulla site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels are 154.4075, 155.3025 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are La Salle County fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for La Salle County are marked encrypted.
Are La Salle County fire and EMS talkgroups encrypted?
None of the 1 talkgroups listed for La Salle County are marked encrypted.