Skip to content

Kleberg County Fire and EMS Frequencies

Kleberg County in Texas has 0 countywide conventional frequencies and 5 countywide talkgroups in our database. Use the list of 6 cities and communities below for local fire departments and EMS agencies.

About Kleberg County Fire and EMS Frequencies

Quick answer: Trunked: Coastal Bend Regional Interoperability Network, for example Kleberg County Fire talkgroup 45113 (hex b039).

  • Trunked radio systems that carry fire and EMS traffic here: Coastal Bend Regional Interoperability Network: 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Kleberg County, start with the Kingsville site of Coastal Bend Regional Interoperability Network. Its control channels: 851.05, 851.4, 852.05 MHz.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Data updated .

Kleberg County trunked talkgroups

Coastal Bend Regional Interoperability Network

System ID 051

Coastal Bend Regional Interoperability Network talkgroups
AgencyDescriptionTalkgroupHexMode
Kleberg County FireKleberg County Fire – Dispatch45113b039T
ICS 11 FireICS 11 Fire Tactical21307533bT
Halo Flight EMSHalo Flight EMS Dispatch2199055e6T
ICS 13 EMSICS 13 EMS Command21309533dT
1 encrypted talkgroup (cannot be monitored)
Coastal Bend Regional Interoperability Network encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
ICS 9 FireICS 9 Fire Command213055339T Encrypted

Radio system sites in Kleberg County

Program the control channel first; your scanner finds the voice channels from it.

Kingsville · Coastal Bend Regional Interoperability Network
RFSS 61 · Site 61 (hex 3D) · NAC 47
Control 851.05, 851.4, 852.05, 852.4, 853.05
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Kleberg County

Common questions

Do fire departments and EMS use a trunked radio system in Kleberg County?

Yes. Fire and EMS talkgroups are listed for Coastal Bend Regional Interoperability Network: 5 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Kleberg County?

A trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Kleberg County?

For Kleberg County, start with the Kingsville site of Coastal Bend Regional Interoperability Network. Its control channels are 851.05, 851.4, 852.05, 852.4 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Kleberg County fire and EMS talkgroups encrypted?

1 of the 5 talkgroups listed for Kleberg County are marked fully or partly encrypted; a scanner cannot decode encrypted audio.