Skip to content

Kinney County Fire and EMS Frequencies

Kinney County in Texas has 1 countywide conventional frequency and 0 countywide talkgroups in our database. Use the list of 3 cities and communities below for local fire departments and EMS agencies.

About Kinney County Fire and EMS Frequencies

Quick answer: Fire dispatch for Kinney County: Kinney County Fire 154.9650 MHz, narrow FM, no tone.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Kinney County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Kinney County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Kinney County FireFire/EMS Dispatch154.9650FMNWQTV603

Radio system sites in Kinney County

Program the control channel first; your scanner finds the voice channels from it.

Bracketville · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 13 (hex D) · NAC 135
Control 151.01, 154.2575
Voice 155.655, 155.6775
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Kinney County

Common questions

What frequency does the fire department use in Kinney County?

Fire dispatch channels listed for Kinney County: Kinney County Fire 154.9650 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Kinney County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Kinney County?

For Kinney County, start with the Bracketville site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels are 151.01, 154.2575 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Kinney County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Kinney County are marked encrypted.