About Jefferson County Fire and EMS Frequencies
Quick answer: EMS dispatch for Jefferson County: Acadian EMS 155.2200 MHz, FM, no tone. Trunked: Southeast Texas Regional Radio System (SETRRS) (P25) (Project 25), for example Central Dispatch talkgroup 305 (hex 131).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Southeast Texas Regional Radio System (SETRRS) (P25) (Project 25): 23 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Jefferson County, start with the Port Arthur site of Southeast Texas Regional Radio System (SETRRS) (P25). Its control channels: 772.71875, 774.44375 MHz.
- 1 listed entry is marked encrypted. No scanner can decode encrypted audio.
Data updated .
Jefferson County conventional frequencies
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Acadian EMS | Acadian EMS VHF Dispatch (All Orange and S. Jefferson Cos.) | 155.2200 | FM | KNHY281 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Acadian EMS | Texas Ambulance to Hospital Network | 155.3400 | FM | KNHY281 |
Jefferson County trunked talkgroups
Southeast Texas Regional Radio System (SETRRS) (P25)
Project 25
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Central Dispatch | Central Dispatch – Dispatch | 305 | 131 | D |
| Port Arthur Fire | Station 8 (Northwest) | 265 | 109 | D |
| Port Arthur Fire | All Stations Announcement | 267 | 10b | D |
| Port Arthur Fire | Station 1 (Woodworth/Thomas) | 269 | 10d | D |
| Port Arthur Fire | Station 2 (Gamble/Grannis) | 271 | 10f | D |
| Port Arthur Fire | Station 4 (Sabine Pass) | 275 | 113 | D |
| Port Arthur Fire | Station 5 (Lewis/Main) | 277 | 115 | D |
| Port Arthur Fire | Station 6 (Hwy 73/9th Ave) | 279 | 117 | D |
| Port Arthur Fire | Channel 1 Dispatch | 319 | 13f | D |
| Rural Fire | ESD Fire Dispatch | 643 | 283 | D |
| Port Arthur Fire | Port Arthur Fire – Fire Ground | 321 | 141 | D |
| Port Arthur Fire | Port Arthur Fire – Fire Ground | 323 | 143 | D |
| Port Arthur Fire | Arson | 325 | 145 | D |
| Rural Fire | Water District 10 Fire Tactical | 327 | 147 | D |
| Rural Fire | ESD #3 Fire Tactical (Labelle/Fannett) | 641 | 281 | D |
| Rural Fire | ESD #4 Fire Tactical (China/Nome) | 649 | 289 | D |
| Acadian Ambulance | Acadian Ambulance – Dispatch – Jefferson County | 1359 | 54f | D |
| Acadian Ambulance | Acadian Ambulance – Dispatch – Orange County | 1361 | 551 | D |
| Acadian Ambulance | Acadian Ambulance – Dispatch – Hardin County | 1363 | 553 | D |
| Acadian Ambulance | Acadian Ambulance – Dispatch – Shuttles | 1369 | 559 | D |
| Acadian Ambulance | Operations (Air Operations) | 1365 | 555 | D |
| Acadian Ambulance | Acadian Ambulance – Tactical Channel | 1367 | 557 | D |
1 encrypted talkgroup (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Port Arthur Fire | Station 3 (Port Acres) | 273 | 111 | D Encrypted |
Radio system sites in Jefferson County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Jefferson County
Common questions
What frequency does EMS or the ambulance service use in Jefferson County?
EMS dispatch channels listed for Jefferson County: Acadian EMS 155.2200 MHz, FM, no tone.
Do fire departments and EMS use a trunked radio system in Jefferson County?
Yes. Fire and EMS talkgroups are listed for Southeast Texas Regional Radio System (SETRRS) (P25) (Project 25): 23 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Jefferson County?
The analog conventional channels can be heard on any scanner; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.
What are the control channels for trunked radio in Jefferson County?
For Jefferson County, start with the Port Arthur site of Southeast Texas Regional Radio System (SETRRS) (P25). Its control channels are 772.71875, 774.44375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Jefferson County fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Jefferson County are marked encrypted.
Are Jefferson County fire and EMS talkgroups encrypted?
1 of the 23 talkgroups listed for Jefferson County are marked fully or partly encrypted; a scanner cannot decode encrypted audio.