Skip to content

Howard County Fire and EMS Frequencies

Howard County in Texas has 2 countywide conventional frequencies and 1 countywide talkgroup in our database. Use the list of 7 cities and communities below for local fire departments and EMS agencies.

About Howard County Fire and EMS Frequencies

Quick answer: Fire dispatch for Howard County: Howard County Fire 155.1150 MHz, FM, 88.5 PL. Trunked: Howard County Public Safety, for example Howard County Fire talkgroup 2201 (hex 899).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Howard County Public Safety: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Howard County, start with the Big Spring site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels: 152.5175, 152.7425 MHz.

Data updated .

Howard County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Howard County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Howard County FireHoward County Fire – Dispatch155.1150
In 159.0450
88.5 PLFMWQHB953

Hospitals & Medical

Hospitals & Medical frequencies for Howard County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Big Spring State HospitalBig Spring State Hospital Operations158.8200
In 153.7550
141.3 PLFMWQHB953

Howard County trunked talkgroups

Howard County Public Safety

Howard County Public Safety talkgroups
AgencyDescriptionTalkgroupHexMode
Howard County FireCounty Fire Dispatch2201899T

Radio system sites in Howard County

Program the control channel first; your scanner finds the voice channels from it.

Big Spring · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 89 (hex 59) · NAC 130
Control 152.5175, 152.7425
Voice 151.07, 154.1225
Simulcast · Howard County Public Safety
RFSS 10 · Site 10 (hex A) · NAC 00A
Control 769.30625, 770.30625, 771.30625, 772.30625, 773.48125, 774.70625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Howard County

Common questions

What frequency does the fire department use in Howard County?

Fire dispatch channels listed for Howard County: Howard County Fire 155.1150 MHz, FM, 88.5 PL.

Do fire departments and EMS use a trunked radio system in Howard County?

Yes. Fire and EMS talkgroups are listed for Howard County Public Safety: 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Howard County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Howard County?

For Howard County, start with the Big Spring site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels are 152.5175, 152.7425 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Howard County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Howard County are marked encrypted.

Are Howard County fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Howard County are marked encrypted.