About Hood County Fire and EMS Frequencies
Quick answer: Fire dispatch for Hood County: Hood County Fire 153.8900 MHz, FM, 225.7 PL. Trunked: Granbury Regional Radio Network, for example Hood County Fire talkgroup 1018 (hex 3fa).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Granbury Regional Radio Network: 24 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Hood County, start with the Hood County Simulcast site of Granbury Regional Radio Network. Its control channels: 771.91875, 772.18125, 773.19375 MHz.
Data updated .
Hood County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hood County Fire | Fire Primary | 153.8900 In 154.4450 | 225.7 PL | FM | WPWI267 |
Hood County trunked talkgroups
Granbury Regional Radio Network
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Hood County Fire | Hood County Fire – Dispatch | 1018 | 3fa | D |
| Hood County Fire | North Hood Volunteer Fire Department (Station 20) Alerting | 1044 | 414 | D |
| Hood County Fire | DeCordova – Acton Volunteer Fire Department (Station 40) Alerting | 1046 | 416 | D |
| Hood County Fire | Indian Harbor Fire Department (Station 50) Alerting | 1047 | 417 | D |
| Hood County Fire | Station 70 Volunteer Fire Department (Station 70) Alerting | 1049 | 419 | D |
| Hood County Fire | Hood County Fire Marshal Alerting | 1052 | 41c | D |
| Hood County Fire | Hood County Fire – Tactical Channel | 1021 | 3fd | D |
| Hood County Fire | Hood County Fire – Tactical Channel | 1022 | 3fe | D |
| Hood County Fire | Hood County Fire – Tactical Channel | 1023 | 3ff | D |
| Hood County Fire | Hood County Fire – Tactical Channel | 1024 | 400 | D |
| Hood County Fire | Hood County Fire – Tactical Channel | 1025 | 401 | D |
| Hood County Fire | Hood County Fire – Fire Ground | 1030 | 406 | D |
| Hood County Fire | Hood County Fire – Fire Ground | 1031 | 407 | D |
| Hood County Fire | Hood County Fire – Fire Ground | 1032 | 408 | D |
| Hood County Fire | Hood County Fire – Fire Ground | 1033 | 409 | D |
| Hood County Fire | Hood County Fire – Fire Ground | 1034 | 40a | D |
| Hood County Fire | Fire Marshall | 1017 | 3f9 | D |
| Hood County EMS | Hood County EMS – Dispatch | 1019 | 3fb | D |
| Hood County EMS | Texas EMS Station 1 Alerting | 1054 | 41e | D |
| Hood County EMS | Texas EMS Station 2 Alerting | 1055 | 41f | D |
| Hood County EMS | Texas EMS Station 3 Alerting | 1056 | 420 | D |
| Hood County EMS | Texas EMS Station 4 Alerting | 1057 | 421 | D |
| Hood County EMS | Texas EMS Station 5 Alerting | 1058 | 422 | D |
| Hood County Hospital | EMS to Hospital Lake Granbury Medical Center | 1040 | 410 | D |
Radio system sites in Hood County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Hood County
Common questions
What frequency does the fire department use in Hood County?
Fire dispatch channels listed for Hood County: Hood County Fire 153.8900 MHz, FM, 225.7 PL.
Do fire departments and EMS use a trunked radio system in Hood County?
Yes. Fire and EMS talkgroups are listed for Granbury Regional Radio Network: 24 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Hood County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Hood County?
For Hood County, start with the Hood County Simulcast site of Granbury Regional Radio Network. Its control channels are 771.91875, 772.18125, 773.19375, 774.16875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Hood County fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Hood County are marked encrypted.
Are Hood County fire and EMS talkgroups encrypted?
None of the 24 talkgroups listed for Hood County are marked encrypted.