About Austin Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Austin: Hays County Fire 154.0100 MHz, narrow FM, 151.4 PL. Trunked: Greater Austin/Travis Regional Radio System (GATRRS), for example Hays County Hospital talkgroup 1241 (hex 4d9).
- 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Greater Austin/Travis Regional Radio System (GATRRS): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Austin, start with the Austin Travis site of Greater Austin/Travis Regional Radio System (GATRRS), about 2 miles away. Its control channels: 851.1375, 851.2875, 851.3125 MHz.
Data updated .
Hays County channels that also cover Austin
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hays County Fire | Wimberley Volunteer Fire Department Dispatch | 154.0100 In 154.3400 | 151.4 PL | FMN | WPVV925 |
| Hays County Fire | North Hays Fire Operations Patched to LCRA 5562 | 154.2500 In 159.0450 | 127.3 PL | FMN | WPBG523 |
| Hays County Fire | South Dispatch Patched to LCRA | 154.3550 In 153.8900 | 351 DPL | FMN | WNAG548 |
| Hays County Fire | East Dispatch Patched to LCRA | 154.3850 In 153.7700 | 151.4 PL | FMN | WQU379 |
| Hays County Fire | North Hays Fire Alarm Patched to LCRA 5561 | 154.9950 In 158.8800 | 151.4 PL | FMN | WPMN437 |
| Hays County Fire | Wimberley Fire/EMS Dispatch Patched to LCRA | 155.8950 In 153.8750 | 151.4 PL | FMN | KGU911 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hays County Fire | Fire Marshals | 855.7375 In 810.7375 | 023 DPL | FM | WNPA614 |
Greater Austin/Travis Regional Radio System (GATRRS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Hays County Hospital | EMS to Seton Hays County Hospital | 1241 | 4d9 | D |
| Hays County Hospital | EMS to Seton Hays County Hospital | 5500 | 157c | D |
Nearest trunked radio sites
Distances are measured from the center of Austin.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Austin?
We do not have a fire dispatch channel listed specifically for Austin. The county-level fire dispatch channels in the same county: Hays County Fire 154.0100 MHz, narrow FM, 151.4 PL.
Do fire departments and EMS use a trunked radio system in Austin?
Yes. The county-level systems that cover Austin are Fire and EMS talkgroups are listed for Greater Austin/Travis Regional Radio System (GATRRS): 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Austin?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Austin?
For Austin, start with the Austin Travis site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels are 851.1375, 851.2875, 851.3125, 851.3875 MHz. Program a control channel first; the scanner finds the voice channels from it.