Skip to content

Longview Police Frequencies

We do not have frequencies listed specifically for Longview in Harrison County, Texas yet. Countywide channels for Harrison County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Longview (Texas Wide Area Radio Network (TxWARN)), about 2 miles away.

Longview also extends into Gregg County.

About Longview Police Frequencies

Quick answer: County-level dispatch that covers Longview: Harrison County Sheriff 155.5950 MHz, narrow FM, 162.2 PL. Trunked: Marshall, for example Harrison County Sheriff talkgroup 25 (hex 19).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry law-enforcement traffic here: Marshall: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Longview, start with the Longview site of Texas Wide Area Radio Network (TxWARN), about 2 miles away. Its control channels: 858.7625, 858.9375, 859.7625 MHz.

Data updated .

Harrison County channels that also cover Longview

Dispatch

Dispatch frequencies for Harrison County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Harrison County SheriffHarrison County Sheriff – Dispatch155.5950
In 154.7100
162.2 PLFMNKNBH392

Tactical

Tactical frequencies for Harrison County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Harrison County SheriffHarrison County Sheriff – Alternate154.8000
In 158.9700
FMNKNBH392
Harrison County SheriffDistrict Attorney156.1950FMNWPNZ974

Marshall

Marshall talkgroups
AgencyDescriptionTalkgroupHexMode
Harrison County SheriffHarrison County Sheriff – Dispatch (155.595 Linked)2519T

Nearest trunked radio sites

Distances are measured from the center of Longview.

Longview · Texas Wide Area Radio Network (TxWARN)
RFSS 2 · Site 42 (hex 2A) · NAC 1A0 · about 2 mi away
Control 858.7625, 858.9375, 859.7625, 859.9375
Voice 854.2875, 854.7125, 855.2125, 856.7625, 857.7625, 857.9375
Kilgore · Texas Wide Area Radio Network (TxWARN)
RFSS 2 · Site 30 (hex 1E) · NAC 1A0 · about 10 mi away
Control 857.2375, 857.7375, 858.0625, 858.4875
Voice 856.0375, 856.9625
Winona · Texas Wide Area Radio Network (TxWARN)
RFSS 2 · Site 37 (hex 25) · NAC 1A0 · about 18 mi away
Control 852.9875, 853.9875
Voice 851.1375, 851.45, 851.6875, 851.95, 852.55
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency do the police use in Longview?

We do not have a dispatch channel listed specifically for Longview. The county sheriff's dispatch channels in the same county: Harrison County Sheriff 155.5950 MHz, narrow FM, 162.2 PL.

Do the police use a trunked radio system in Longview?

Yes. The county-level systems that cover Longview are Law-enforcement talkgroups are listed for Marshall: 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to police in Longview?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Longview?

For Longview, start with the Longview site of Texas Wide Area Radio Network (TxWARN). Its control channels are 858.7625, 858.9375, 859.7625, 859.9375 MHz. Program a control channel first; the scanner finds the voice channels from it.