Skip to content

Grimes County Fire and EMS Frequencies

Grimes County in Texas has 2 countywide conventional frequencies and 5 countywide talkgroups in our database. Use the list of 12 cities and communities below for local fire departments and EMS agencies.

About Grimes County Fire and EMS Frequencies

Quick answer: Fire dispatch for Grimes County: Grimes County Fire 154.3250 MHz, narrow FM, 79.7 PL. EMS dispatch for Grimes County: Grimes County EMS 151.4975 MHz, narrow FM, 134 DPL. Trunked: Texas Wide Area Radio Network (TxWARN), for example Grimes County Fire talkgroup 2573 (hex a0d).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Texas Wide Area Radio Network (TxWARN): 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Grimes County, start with the Anderson site of Texas Wide Area Radio Network (TxWARN). Its control channels: 769.56875, 769.61875 MHz.

Data updated .

Grimes County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Grimes County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Grimes County FireGrimes County Fire – Dispatch154.3250
In 156.0450
79.7 PLFMNWPVR897

EMS Dispatch

EMS Dispatch frequencies for Grimes County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Grimes County EMSSt. Joseph's Hospital Ambulance Service151.4975
In 150.7900
134 DPLFMNWQPA545

Grimes County trunked talkgroups

Texas Wide Area Radio Network (TxWARN)

Texas Wide Area Radio Network (TxWARN) talkgroups
AgencyDescriptionTalkgroupHexMode
Grimes County FireGrimes County Fire – Dispatch (patch to 154.325 MHz)2573a0dD
Grimes County FireGrimes County Fire – Tactical Channel2574a0eD
Grimes County EMSGrimes County EMS – Dispatch2575a0fD
Grimes County EMSRoads2576a10D
Grimes County EMSEMS First Responders2577a11D

Radio system sites in Grimes County

Program the control channel first; your scanner finds the voice channels from it.

Anderson · Texas Wide Area Radio Network (TxWARN)
RFSS 1 · Site 42 (hex 2A) · NAC 1A1
Control 769.56875, 769.61875
Voice 770.78125, 771.26875, 771.30625, 772.30625
Bedias · Texas Wide Area Radio Network (TxWARN)
RFSS 1 · Site 43 (hex 2B) · NAC 1A1
Control 770.36875, 771.99375, 774.23125
Voice 769.54375, 771.15625, 771.68125
Navasota · Texas Wide Area Radio Network (TxWARN)
RFSS 1 · Site 46 (hex 2E) · NAC 1A0
Control 853.4375
Voice 851.9, 852.2, 852.5625, 852.8625, 853.1625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Grimes County

Common questions

What frequency does the fire department use in Grimes County?

Fire dispatch channels listed for Grimes County: Grimes County Fire 154.3250 MHz, narrow FM, 79.7 PL.

What frequency does EMS or the ambulance service use in Grimes County?

EMS dispatch channels listed for Grimes County: Grimes County EMS 151.4975 MHz, narrow FM, 134 DPL.

Do fire departments and EMS use a trunked radio system in Grimes County?

Yes. Fire and EMS talkgroups are listed for Texas Wide Area Radio Network (TxWARN): 5 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Grimes County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Grimes County?

For Grimes County, start with the Anderson site of Texas Wide Area Radio Network (TxWARN). Its control channels are 769.56875, 769.61875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Grimes County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Grimes County are marked encrypted.

Are Grimes County fire and EMS talkgroups encrypted?

None of the 5 talkgroups listed for Grimes County are marked encrypted.