About Wortham Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Wortham: Freestone County Fire 154.4150 MHz, narrow FM, 445 DPL.
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Wortham conventional frequencies
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Wortham Volunteer Fire Department | Wortham Volunteer Fire Department – Tactical Channel (Sheriff Channel 8) | 154.4300 | 100.0 PL | FMN | WNLF465 |
Freestone County channels that also cover Wortham
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Freestone County Fire | Fire and EMS Dispatch | 154.4150 In 154.0700 | 445 DPL | FMN | WNWT888 |
Nearest trunked radio sites
Distances are measured from the center of Wortham.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Wortham?
We do not have a fire dispatch channel listed specifically for Wortham. The county-level fire dispatch channels in the same county: Freestone County Fire 154.4150 MHz, narrow FM, 445 DPL.
What scanner do I need to listen to fire and EMS in Wortham?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Wortham?
For Wortham, start with the Trinidad site of Henderson County P25. Its control channels are 769.55625, 771.10625, 772.30625, 773.23125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Wortham fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Wortham are marked encrypted.