Skip to content

Erath County Fire and EMS Frequencies

Erath County in Texas has 11 countywide conventional frequencies and 15 countywide talkgroups in our database. Use the list of 19 cities and communities below for local fire departments and EMS agencies.

About Erath County Fire and EMS Frequencies

Quick answer: Fire dispatch for Erath County: Dublin, City of Fire 158.9550 MHz, narrow FM, 162.2 PL; Erath, County of 151.2500 MHz, narrow FM, 110.9 PL; Stephenville, City of Fire 154.0100 MHz, P25, NAC 162. Trunked: Granbury Regional Radio Network, for example Erath County Fire talkgroup 2010 (hex 7da).

  • 10 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: Granbury Regional Radio Network: 15 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Erath County, start with the Stephenville site of Granbury Regional Radio Network. Its control channels: 770.28125, 771.70625, 772.93125 MHz.

Data updated .

Erath County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Erath County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dublin, City of FireDublin Fire Dispatch158.9550162.2 PLFMNWPIR839
Erath, County ofFire/EMS Stephenville RPTR151.2500
In 153.7550
110.9 PLFMNKZC619
Erath, County ofFire/EMS Morgan Mill Repeater151.3175
In 159.4650
051 DPLFMNKZC619
Stephenville, City of FireStephenville, City of Fire – Dispatch (Digital)154.0100
In 154.4300
NAC 162P25KNJV858
Stephenville, City of FireFire/EMS Toneouts (Analog)154.0100
In 154.4300
162.2 PLFMNKNJV858

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Erath County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Erath, County ofMorgan Mills/Huckaby/Selden VFDs Tactical154.2350411 DPLFMNKNJV858
Erath, County ofErath, County of – Fire Ground (also called TX FIRE 1A)154.2800127.3 PLFMNKNJV858
Erath, County ofDublin/Bluff Dale VFDs Tactical154.3100179.9 PLFMNKNJV858
Stephenville, City of FireMorgan Mill Volunteer Fire Department, Huckabay Volunteer Fire Department, and Selden Volunteer Fire Department Tactical Channel154.2350FMNKNJV858
Stephenville, City of FireDublin Volunteer Fire Department and Bluff Dale Volunteer Fire Department Tactical Channel154.3100FMNKNJV858
Stephenville, City of FireStephenville, City of Fire – Tactical Channel154.3550162.2 PLFMNKNJV858

Erath County trunked talkgroups

Granbury Regional Radio Network

Granbury Regional Radio Network talkgroups
AgencyDescriptionTalkgroupHexMode
Erath County FireFire Alarm20107daD
Erath County FireFire EMS Dispatch4009fa9D
Erath County FireFire Tones Only4017fb1D
Erath County FireCounty Fire Dispatch (by Stephenville)4018fb2D
Erath County FireErath Volunteer Fire Department20117dbD
Erath County FireMorgan Hill Volunteer Fire Department20137ddD
Erath County FireVolunteer Fire Department FireGround20167e0D
Erath County FireVolunteer Fire Department FireGround20177e1D
Erath County FireVolunteer Fire Department FireGround20187e2D
Erath County FireVolunteer Fire Department FireGround20197e3D
Erath County FireVolunteer Fire Department FireGround20207e4D
Erath County FireBulff Dale Volunteer Fire Department20227e6D
Erath County FireErath Air Med20247e8D
Erath County EMSCounty EMS Dispatch (by Stephenville)4019fb3D
Erath County EMSErath County EMS – Tactical Channel20097d9D

Radio system sites in Erath County

Program the control channel first; your scanner finds the voice channels from it.

Stephenville · Granbury Regional Radio Network
RFSS 1 · Site 1 (hex 1) · NAC 001
Control 770.28125, 771.70625, 772.93125, 773.93125
NW Erath County Simulcast · Granbury Regional Radio Network
RFSS 40 · Site 40 (hex 28) · NAC 028
Control 769.58125, 772.68125, 773.43125, 774.23125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Erath County

Common questions

What frequency does the fire department use in Erath County?

Fire dispatch channels listed for Erath County: Dublin, City of Fire 158.9550 MHz, narrow FM, 162.2 PL; Erath, County of 151.2500 MHz, narrow FM, 110.9 PL; Stephenville, City of Fire 154.0100 MHz, P25, NAC 162.

Do fire departments and EMS use a trunked radio system in Erath County?

Yes. Fire and EMS talkgroups are listed for Granbury Regional Radio Network: 15 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Erath County?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Erath County?

For Erath County, start with the Stephenville site of Granbury Regional Radio Network. Its control channels are 770.28125, 771.70625, 772.93125, 773.93125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Erath County fire and EMS frequencies encrypted?

None of the 11 conventional frequencies listed for Erath County are marked encrypted.

Are Erath County fire and EMS talkgroups encrypted?

None of the 15 talkgroups listed for Erath County are marked encrypted.