Skip to content

Barksdale Fire and EMS Frequencies

We do not have frequencies listed specifically for Barksdale in Edwards County, Texas yet. Countywide channels for Edwards County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Barksdale (Greater Austin/Travis Regional Radio System (GATRRS)), about 2 miles away.

About Barksdale Fire and EMS Frequencies

We don't have any verified fire and EMS frequencies for Barksdale yet, but we're working on adding some.

If you know of any, or spot something wrong on a nearby page, please send it to contact@scanner-frequencies.com and we'll check it against the official records.

Nearest trunked radio sites

Distances are measured from the center of Barksdale.

Barksdale · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 17 (hex 11) · NAC 131 · about 2 mi away
Control 154.9275, 155.2725
Voice 154.415
Leakey · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 26 (hex 1A) · NAC 13D · about 13 mi away
Control 154.8075, 155.0325
Voice 155.265
Concan · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 19 (hex 13) · NAC 139 · about 19 mi away
Control 158.8275, 159.1575
Voice 159.12
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What are the control channels for trunked radio in Barksdale?

For Barksdale, start with the Barksdale site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels are 154.9275, 155.2725 MHz. Program a control channel first; the scanner finds the voice channels from it.