Skip to content

Cooper Fire and EMS Frequencies

Cooper in Delta County, Texas has 2 conventional frequencies and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Northwest County (Hunt County P25), about 28 miles away.

About Cooper Fire and EMS Frequencies

Quick answer: Fire dispatch for Cooper: Cooper Fire 155.0250 MHz, P25, NAC 173. County-level ems dispatch that covers Cooper: Delta County EMS 453.3500 MHz, P25, NAC 259.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 2 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Cooper conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Cooper
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cooper FireCooper/Delta Co Fire P25155.0250
In 153.8000
NAC 173P25KMA246
Cooper FireCooper/Delta Co Fire155.0250
In 153.8000
173.8 PLFMNKMA246

Delta County channels that also cover Cooper

Fire Talk-around

Fire Talk-around frequencies for Delta County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Delta County FireHighway Maintenence and Fire Alternate158.7300FMNKVX665

EMS Dispatch

EMS Dispatch frequencies for Delta County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Delta County EMSHopkins EMS Dispatch – Cooper Tower453.3500
In 458.3500
NAC 259P25WXW962

EMS Tactical

EMS Tactical frequencies for Delta County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Delta County EMSHopkins EMS Dispatch463.1000
In 468.1000
261 DPLFMNWZW962

Nearest trunked radio sites

Distances are measured from the center of Cooper.

Northwest County · Hunt County P25
Project 25 · RFSS 26 · Site 26 (hex 1A) · NAC 1A · about 28 mi away
Control 770.79375, 771.51875, 772.94375, 773.46875
Greenville · Greenville P25
Project 25 · RFSS 1 · Site 1 (hex 1) · NAC BE1 · about 30 mi away
Control 770.75625, 771.30625, 772.36875, 773.19375
Voice 773.63125, 774.38125
South County · Hunt County P25
Project 25 · RFSS 10 · Site 10 (hex A) · NAC A · about 33 mi away
Control 769.79375, 771.04375, 772.28125, 774.91875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Cooper?

Fire dispatch channels listed for Cooper: Cooper Fire 155.0250 MHz, P25, NAC 173.

What frequency does EMS or the ambulance service use in Cooper?

We do not have a EMS dispatch channel listed specifically for Cooper. The county-level EMS dispatch channels in the same county: Delta County EMS 453.3500 MHz, P25, NAC 259.

What scanner do I need to listen to fire and EMS in Cooper?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Cooper?

For Cooper, start with the Northwest County site of Hunt County P25. Its control channels are 770.79375, 771.51875, 772.94375, 773.46875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Cooper fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Cooper are marked encrypted.